elynch2007
-
Posts
160 -
Joined
-
Last visited
elynch2007's Achievements
Looks for Range (1/11)
-
2018 Pro Am Registration?
elynch2007 replied to RolexJohn's topic in Multi-Gun, Rifle & Shotgun Match Announcements
When will the squads be opening up for the Pro-Am? -
Not having the stages descriptions is a bad idea.. I know they are not accurate, but they at least you know which guns, ammo, or mags to bring to the stage. Without them everyone has to carry everything from the car to the stage or go look at the stage, then go back to the car. Sometime parking is a couple hundred yards from the stages.
-
Just a month away!!!!!!!!
-
Please send photos to elynch1977@gmail.com.
do you use 18-9 mags for 9mm?
does any mags come with gun?
-
I had the sti for para mag catch installed and have been running sti 9mm mags flawlessly! If you want some Para 9mm/38S mags I could include 3 and either 3 or 4 Para 40 mags. I will get some pics asaic, it isn't pretty, but functions like I said, flawlessly. I refer to it as my frankenpara....Think I have a blade tech holster I will include as well if you want it.
-
-
I found all my Para mags and parts. Think there are 4, I know I have a stainless, .40 mags with I believe 4 dawson pads and probably close to 10 9mm/38S mags. That being said, all the extra mags kind of means more money, I would include 3 .40 and 3 9mm/38S mags with the gun.Plus all the Dawson pads and the holster I mentioned earlier for $1500.You are close enough we could just meet up somewhere.
-
-
A Great Big Thanks to all the staff, RO's, To Gary, Linda, and all the who had a hand in make this another fun and exciting Pro-Am.. THANK YOU
-
Barrysuperhawk You are listed as on squad 1 with us. Did no see you listed on squad 6
-
I hate that .223 ammo can double in price in less than 2 days. What are people thinking?????
-
Signed in, payed up, motel reserved, vacation applied for, and wife is still happy. Life is good
-
Rockcastle webpage shows Pro Am August 20-23, 2015
-
How to make Versa Max shoot slugs straight
elynch2007 replied to Trevarm's topic in Shotgun - Technical
My Versa Max 28 inch shot about 8.5 inches to the right at 50 yards. Sent it back to Remington and now it is dead on at 60 yards. The report states that they changed barrel, forearm, and trigger group. What the report did not say anything about was they removed and re-installed the mag tube, because the holes where the indents were are now rotated about 75 degrees. My belief is the mag tubes are not lined up correctly as some many others have stated above. Remington charged me ZERO dollars and paid shipping both ways. -
My Thanks to the whole staff for the match. Thanks to all the sponsors too. One and a half hours into the Am prize table, I still got a one hundred dollar Extreme Bullet certificate plus other small items. Am squad 13: One of the BEST squads that I have ever been on. Thank you guys and gals.
-
Are the Match Books on the website yet? The Am match book will not load and the Pro match book is for 2013. When will the 2014 match books be ready?
-
I was hoping that you or your dad would reply here. The old spring was the older style dark spring and has ran very good in the 1100 for me. The tube on the Versa Max must be a little longer. The new spring is the stainless looking spring. 17 inches past the tube just seemed to be much more than I thought, but I wanted to start long. I have seen many times here that 14 for a +6 tube is about normal. I am going to drop back to around 15 inches to give more of a buffer for loading the last round. Thanks
-
I installed the Nordic MXT +7 tube from my 1100 on a new Versa Max using a new Versa Max nut and the old spring and that was cut at 14 inches in the 1100. The last round was not feeding on the Versa Max and only measured 13 inches in the Versa Max. Installed a new Nordic spring, I thought I would start long and cut until I could load 11 in the mag. So cut it 17 inches and installed, found 11 would go in to the mag with around 3/8 inch to spare. Is this too much spring for a Versa Max with a +7 tube? Seems to be working great as is.
-
I installed the Nordic MXT +7 tube from my 1100 on a new Versa Max using a new Versa Max nut and the old spring and that was cut at 14 inches in the 1100. The last round was not feeding on the Versa Max and only measured 13 inches in the Versa Max. Installed a new Nordic spring, I thought I would start long and cut until I could load 11 in the mag. So cut it 17 inches and installed, found 11 would go in to the mag with around 3/8 inch to spare. Is this too much spring for a Versa Max with a +7 tube? Seems to be working great as is.
