jeremy kemlo Posted June 23, 2017 Share Posted June 23, 2017 I just changed my front and rear sights on my M&p pro 5" to warren tactical. The rear sight can be moved side to side with my fingers. I can tighten the set screw and it seems to hold well but makes me uneasy. Is the sight going to stay put with a set screw and a little loctite? Link to comment Share on other sites More sharing options...
Toolguy Posted June 23, 2017 Share Posted June 23, 2017 Yes, but put the loctite in the dovetail as well as the screw threads. Blue is fine for most applications and easy to remove if desired. Link to comment Share on other sites More sharing options...
jeremy kemlo Posted June 24, 2017 Author Share Posted June 24, 2017 15 hours ago, Toolguy said: Yes, but put the loctite in the dovetail as well as the screw threads. Blue is fine for most applications and easy to remove if desired. Thanks. Link to comment Share on other sites More sharing options...
practical_man Posted June 24, 2017 Share Posted June 24, 2017 Jeremy Warren gives great advice on everything. I will I'll add that you can dimple the bottom of the sight with a prick punch or center punch. That will tighten the fit a little. I tend to do both Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now