Timido Posted June 5, 2017 Share Posted June 5, 2017 (edited) Long story short. I just put a Delta point pro on my CZ Custom cut slide. My slide came loose with the factory deltapoint screws and I lost the pins. If anyone has the delta point pins handy and can get me an accurate measurement that would be great. The Screws that were sent with the CZ Custom slide are not long enough and are 8-32 So I am supposed to ream my deltapoint with a #19 drill bit and come up with the 8-32 screws. Can anyone help me with the supplied pin measurements or your experiences with mounting the Delta Point Pro to the CZ Custom cut slide. Thanks TIm Edited June 5, 2017 by Timido Link to comment Share on other sites More sharing options...
zzt Posted June 5, 2017 Share Posted June 5, 2017 The locator pins on a Deltapoint pro measure 0.1563" in dia. You can probably cut what you need from 5/32 drill rod. Don't ream your sight just yet. Go to you local hardware store and try an M4 x .7 screw. It is the Metric equivalent of an ANSI 8-32 screw, but has a slightly smaller head. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now