JPetrowski Posted May 21, 2017 Share Posted May 21, 2017 (edited) Looking for load data for Acme 147FP with N320. I think I was running bayou at 3.2gr 1.15oal. Does that sound close? I have never used the flat points. This will be used in a glock 34. Thanks Edited May 21, 2017 by JPetrowski Link to comment Share on other sites More sharing options...
bowenbuilt Posted May 21, 2017 Share Posted May 21, 2017 (edited) I have used 3.3 for years @ 1.135 to make 132 PF. Yours should work. 1.150 is getting a little close to hanging up in the magazine so you might want to shorten that up some. At that OAL I get some nose diving depending on the magazine. Edited May 21, 2017 by bowenbuilt Link to comment Share on other sites More sharing options...
armydad Posted May 21, 2017 Share Posted May 21, 2017 This was the load I tested the other week. I also loaded 3.5 grains but didn't get a chance to shoot that. I really liked the load below and have shot it out of my G34 as well. Below is my data from my Pro Chono a few weeks ago. It'll at least give you an idea. Best of luck! G17,147@3.8n320@1.13 Digital Link Temperature: 74 Pressure: 29.9 inHg Bullet Weight: 147 Power Factor Average: 136 Power Factor Low: 133 Power Factor High: 138 Number of Shots: 10 Minimum: 908 Maximum: 938 Spread: 30 Average: 925 Standard Deviation: 8 Shot List # Velocity Feet/Lbs Power Factor Date 10 918 275 134 5/12/17, 12:43 PM 9 924 278 135 5/12/17, 12:43 PM 8 918 275 134 5/12/17, 12:43 PM 7 928 281 136 5/12/17, 12:43 PM 6 938 287 137 5/12/17, 12:43 PM 5 933 284 137 5/12/17, 12:43 PM 4 927 280 136 5/12/17, 12:43 PM 3 908 269 133 5/12/17, 12:43 PM 2 929 281 136 5/12/17, 12:43 PM 1 932 283 137 5/12/17, 12:42 PM Link to comment Share on other sites More sharing options...
JPetrowski Posted May 21, 2017 Author Share Posted May 21, 2017 Thanks guys. 3.8 sounds a little high but we will see. I'll load some up from 3.2 to 3.8 and see where I need to be at. I have never loaded the flat points. They were ordered by mistake, hopefully I like them because I just got 5k of them in. Link to comment Share on other sites More sharing options...
armydad Posted May 21, 2017 Share Posted May 21, 2017 (edited) Yeah. I loaded a bunch at 3.5, just haven't shot them in so long I just can't remember. It's possible that is the better load. And I'm not sure how I went from 3.5 to 3.8 as I usually work up loads in .2 grain increments... Edited May 21, 2017 by armydad Link to comment Share on other sites More sharing options...
Ck867 Posted May 25, 2017 Share Posted May 25, 2017 On 5/20/2017 at 5:28 PM, JPetrowski said: Looking for load data for Acme 147FP with N320. I think I was running bayou at 3.2gr 1.15oal. Does that sound close? I have never used the flat points. This will be used in a glock 34. Thanks It should be close but you most likely should be loading shorter since it is FP. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now