Bubing10 Posted April 26, 2017 Share Posted April 26, 2017 hello, planning in trying carry optics and using an accushadow, what optics does works well with this gun? I mean I've heard some people used other optics and having trouble zeroing because optics are too high. My plan is getting rid of front and rear sights and just run woth optics. Do I need to send the slide to a smith for install? Any idea is much appreciated. Link to comment Share on other sites More sharing options...
GregJ Posted April 26, 2017 Share Posted April 26, 2017 I put a Springer plate and Burris FF3 on my Phantom. So far it has worked very well. The optic will depend on your preference, e.g. 6, 8 MOA, etc. Link to comment Share on other sites More sharing options...
MuddAndStuff Posted April 26, 2017 Share Posted April 26, 2017 Milled Delta point pro work very well . Or you can use a plate if you don't want to have it milled in . Link to comment Share on other sites More sharing options...
bsand Posted April 26, 2017 Share Posted April 26, 2017 I use a Springer precision dovetail mount on my shadow custom (10x bushing installed, poormans accushadow). With a vortex viper in 6moa. 2000+ rounds no issues Sent from my Pixel using Tapatalk Link to comment Share on other sites More sharing options...
RAP Posted April 26, 2017 Share Posted April 26, 2017 I couldn't get the rear dove tail mount to hold on my CZ P 09. I am in the process of sending the slide to Cajun Gun Works to have the slide milled for my Delta Point Pro. I would make I sent your slide to a smith who is and have experience in this work. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Ck867 Posted April 26, 2017 Share Posted April 26, 2017 I had a shadow slide milled by Springer Precision for a deltapoint pro. Link to comment Share on other sites More sharing options...
Blue Jacket Posted April 26, 2017 Share Posted April 26, 2017 (edited) I had the CZ custom shop do my Sp-01 with the multi cut. They did a great job. Sorry forgot to add I use a Burris FF3 Edited April 26, 2017 by Blue Jacket Link to comment Share on other sites More sharing options...
CZ85Combat Posted April 27, 2017 Share Posted April 27, 2017 (edited) This is my set up. Edited April 27, 2017 by CZ85Combat Link to comment Share on other sites More sharing options...
rowdyb Posted April 27, 2017 Share Posted April 27, 2017 have a reputable place do the milling. LP Deltapoint Pro or Burrs FF3 would be my choices. i have a dovetail mount and a 2.5moa RMR. i hate that the dovetail mount doesn't stay tight all the time and i hate that i have to remove the optic from the mount to change the battery. all reasons enough to go with milling and a different sight if you ask me Link to comment Share on other sites More sharing options...
mclaren Posted April 27, 2017 Share Posted April 27, 2017 Is there any optic that will fit with cowitnessed irons? Link to comment Share on other sites More sharing options...
Bubing10 Posted April 27, 2017 Author Share Posted April 27, 2017 Ok, so the consensus is: send the slide for milling for better hold and longevity, I also observed the optic sits lower in a milled slide which is better , LP deltapoint Pro or burris FF3 optics. Link to comment Share on other sites More sharing options...
Bubing10 Posted April 27, 2017 Author Share Posted April 27, 2017 2 hours ago, CZ85Combat said: This is my set up. Where did you send your slide to be milled? it looks like original from factory. clean job. Link to comment Share on other sites More sharing options...
rowdyb Posted April 27, 2017 Share Posted April 27, 2017 1 hour ago, mclaren said: Is there any optic that will fit with cowitnessed irons? don't bother is the consensus if you're doing this for uspsa. Link to comment Share on other sites More sharing options...
CZ85Combat Posted April 27, 2017 Share Posted April 27, 2017 19 hours ago, Bubing10 said: Where did you send your slide to be milled? it looks like original from factory. clean job. In 2013 CZC did the milling and installed the red dot. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now