PaladinPrecision Posted March 28, 2017 Share Posted March 28, 2017 I am not super stoked on my CZC shadow grips. I was wondering what THE most aggressive CZ 75 SP-01 grips were. Any thoughts? I was looking at the VZ diamondback grips. Also wondering if there is a precut front strap / backstrap skateboard tape solution that I can just order. Thanks! Link to comment Share on other sites More sharing options...
inspector1999 Posted March 28, 2017 Share Posted March 28, 2017 I have the LOK Palm Swells Bogies. They are aggressive enough that they take skin until you have calluses on your hands. They have a different profile than the CZC grips, but they sell a thin set as well. On the front strap of my SP01 Tactical I put skateboard tape, I didn't put any on the Accu, I didn't feel the need with the LOK Grips. My 2¢.Sent from my Pixel using Tapatalk Link to comment Share on other sites More sharing options...
phoenixsomd Posted March 28, 2017 Share Posted March 28, 2017 The Scales grips may also appeal to you. Sent from my SM-G935V using Tapatalk Link to comment Share on other sites More sharing options...
B_RAD Posted March 28, 2017 Share Posted March 28, 2017 I've tried scales, LOK Bogies and palm swell VZ Diamond Backs. The VZ's are the most aggressive IMO. Link to comment Share on other sites More sharing options...
Sliv2 Posted March 28, 2017 Share Posted March 28, 2017 I haven't tried the Bogies, but my old VZ grips were the most aggressive I've tried. (I currently use SSI scales) Link to comment Share on other sites More sharing options...
manolis Posted March 28, 2017 Share Posted March 28, 2017 The vote is: VZ Diamond Backs grips . Link to comment Share on other sites More sharing options...
Fantom919 Posted March 28, 2017 Share Posted March 28, 2017 I prefer a flat surace for a left side grip instead of the contour on the scales or boogies so I use a DAA thick grip and apply silicon carbide to it. Definitely the most grippy and rough I've ever used. Link to comment Share on other sites More sharing options...
bockerSV Posted March 28, 2017 Share Posted March 28, 2017 I used the VZ golf ball style grips for a while and they were good but I did a silicon carbide grip job on a old set of diamond pattern grips, also from VZ, and I don't think it gets any grippier than this. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
B_RAD Posted March 28, 2017 Share Posted March 28, 2017 (edited) 11 minutes ago, bockerSV said: I used the VZ golf ball style grips for a while and they were good but I did a silicon carbide grip job on a old set of diamond pattern grips, also from VZ, and I don't think it gets any grippier than this. Sent from my iPhone using Tapatalk Love that holster! I've been saying that for a while now. I'm Ricky Bobby! Edited March 28, 2017 by B_RAD Link to comment Share on other sites More sharing options...
SlvrDragon50 Posted March 28, 2017 Share Posted March 28, 2017 Hahahha.; That holster is amazing... Link to comment Share on other sites More sharing options...
Ck867 Posted March 28, 2017 Share Posted March 28, 2017 I prefer the czc aggressive for the flat grips but the Lok grips are very aggressive also. It may come down to preference on what texture you want. Link to comment Share on other sites More sharing options...
zen_grasshopper Posted March 28, 2017 Share Posted March 28, 2017 Silicon carbide plus Scales = super aggressive Link to comment Share on other sites More sharing options...
rowdyb Posted March 28, 2017 Share Posted March 28, 2017 Not a fan of scales at all. Link to comment Share on other sites More sharing options...
Sliv2 Posted March 28, 2017 Share Posted March 28, 2017 3 minutes ago, rowdyb said: Not a fan of scales at all. Put in a good word at VZ to do their wide grips in the scale shape please. I'd prefer to have the best of both worlds, and I can't stand the palm swells. Link to comment Share on other sites More sharing options...
SlvrDragon50 Posted March 28, 2017 Share Posted March 28, 2017 2 hours ago, Sliv2 said: Put in a good word at VZ to do their wide grips in the scale shape please. I'd prefer to have the best of both worlds, and I can't stand the palm swells. Ask LOK to do it. He will customize your grips. Link to comment Share on other sites More sharing options...
Magnus DUX Posted March 29, 2017 Share Posted March 29, 2017 These are grippy enaugh Link to comment Share on other sites More sharing options...
biglou13 Posted March 29, 2017 Share Posted March 29, 2017 (edited) 7 hours ago, zen_grasshopper said: Silicon carbide plus Scales = super aggressive What grit and what,did you use for "glue" ? Edited March 29, 2017 by biglou13 Link to comment Share on other sites More sharing options...
zen_grasshopper Posted March 29, 2017 Share Posted March 29, 2017 21 hours ago, biglou13 said: What grit and what,did you use for "glue" ? JB Weld for glue and that is 46-70 grit, but if I did it again I would go 36 grit. I just lightly coated the grips with my finger so that the holes wouldn't get filled with JB Weld. A bit has chipped off through use in the last year, but not bad and as I did it over the smooth aluminum you can remove it by scraping it off with a utility knife and do it again, but it doesn't come off easy. On 3/28/2017 at 1:19 PM, rowdyb said: Not a fan of scales at all. Different strokes for different folks. I have tried the Bogie palm swells, and other thick grips and they just didn't work for me as they were all too thin. Large hands, actually prefer the Tanfo frame, but they weren't available when I bought the Shadows. Link to comment Share on other sites More sharing options...
rowdyb Posted March 31, 2017 Share Posted March 31, 2017 Medium sized hands and I'm not that high in my grip. Link to comment Share on other sites More sharing options...
JGus Posted March 31, 2017 Share Posted March 31, 2017 I prefer the LOK grips Roughnecks with palm swell. They are more aggressive than the Bogey pattern. The LOK grips Roughneck pattern is the identical pattern of the VZ Diamondbacks. Link to comment Share on other sites More sharing options...
robertwyatt Posted April 5, 2017 Share Posted April 5, 2017 I have the LOK bogies based on advice from Rowdyb. Combined with a bit of skateboard tape on the front, they have the perfect amount of grip for my needs. Adding grip lotion to your hands basically makes that gun lock into your hands. The only downside of the bogies is I think I need to add an extended mag release since my thumb barely hits the release. (I've never had a problem, but the extended would give me a bit more confidence in hitting the button where now I really have to be aware of it) Link to comment Share on other sites More sharing options...
chrisbrayton Posted April 6, 2017 Share Posted April 6, 2017 Are there any aluminum grips that are as thick as the stock rubber grips for the SP-01? I have been looking for some but they are all too slim for my quite large hands and feels to flat. I have tried CZ USA and CZ Custom so far. Link to comment Share on other sites More sharing options...
PaladinPrecision Posted April 6, 2017 Author Share Posted April 6, 2017 3 hours ago, chrisbrayton said: Are there any aluminum grips that are as thick as the stock rubber grips for the SP-01? I have been looking for some but they are all too slim for my quite large hands and feels to flat. I have tried CZ USA and CZ Custom so far. I have the CZC flat/ thin grips. I have large hands, but I like the trigger reach with the thin grips. I just want more traction on the gun. Link to comment Share on other sites More sharing options...
manolis Posted April 7, 2017 Share Posted April 7, 2017 18 hours ago, chrisbrayton said: Are there any aluminum grips that are as thick as the stock rubber grips for the SP-01? I have been looking for some but they are all too slim for my quite large hands and feels to flat. I have tried CZ USA and CZ Custom so far. http://www.tonisystem.it/en/grips.html Link to comment Share on other sites More sharing options...
SlvrDragon50 Posted April 7, 2017 Share Posted April 7, 2017 On 4/5/2017 at 11:52 AM, robertwyatt said: I have the LOK bogies based on advice from Rowdyb. Combined with a bit of skateboard tape on the front, they have the perfect amount of grip for my needs. Adding grip lotion to your hands basically makes that gun lock into your hands. The only downside of the bogies is I think I need to add an extended mag release since my thumb barely hits the release. (I've never had a problem, but the extended would give me a bit more confidence in hitting the button where now I really have to be aware of it) That's why I bought a Shadow 2 On 3/31/2017 at 5:43 PM, JGus said: I prefer the LOK grips Roughnecks with palm swell. They are more aggressive than the Bogey pattern. The LOK grips Roughneck pattern is the identical pattern of the VZ Diamondbacks. INteresting you say that. The Bogies are supposed to be the most aggressive pattern according to Jayson. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now