RyanReid Posted March 3, 2017 Share Posted March 3, 2017 Two quick questions. First, the Shooting Sport Innovations Nitro Fin for the Tanfo apparently can be fitted for a TS. Anyone done this yet? Thoughts? Second - does anyone make reduced power mag release springs for the TS? I've been unable to locate one. Link to comment Share on other sites More sharing options...
Milkcoma Posted March 3, 2017 Share Posted March 3, 2017 i have one on my CZ CTS and CZ TS. I did have to fit it. took about 5-10 mins with dremel too. So far i'm liking it alot. I feel it helps establish your initial grip on the gun alot. the back square part has to be rounded for it to pass through the slide. Link to comment Share on other sites More sharing options...
RyanReid Posted March 3, 2017 Author Share Posted March 3, 2017 1 minute ago, Milkcoma said: i have one on my CZ CTS and CZ TS. I did have to fit it. took about 5-10 mins with dremel too. So far i'm liking it alot. I feel it helps establish your initial grip on the gun alot. the back square part has to be rounded for it to pass through the slide. Thanks!!!! Link to comment Share on other sites More sharing options...
Jay870 Posted March 3, 2017 Share Posted March 3, 2017 1 hour ago, RyanReid said: Two quick questions. First, the Shooting Sport Innovations Nitro Fin for the Tanfo apparently can be fitted for a TS. Anyone done this yet? Thoughts? Second - does anyone make reduced power mag release springs for the TS? I've been unable to locate one. No one make a reduced power mag release spring that I am aware. Just bend the leg on the button side... i.e. if you are a righty that hits the release with your right thumb then bend the left leg in. Link to comment Share on other sites More sharing options...
RyanReid Posted March 3, 2017 Author Share Posted March 3, 2017 Just now, Jay870 said: No one make a reduced power mag release spring that I am aware. Just bend the leg on the button side... i.e. if you are a righty that hits the release with your right thumb then bend the left leg in. Looks like I'll buy a factory one and play with it. Gotta have a replacement in case the experiment goes sideways! Link to comment Share on other sites More sharing options...
clw42 Posted March 4, 2017 Share Posted March 4, 2017 On 3/2/2017 at 10:11 PM, Milkcoma said: i have one on my CZ CTS and CZ TS. I did have to fit it. took about 5-10 mins with dremel too. So far i'm liking it alot. I feel it helps establish your initial grip on the gun alot. the back square part has to be rounded for it to pass through the slide. Maybe a silly question, but what do you do about locking the slide back? It's a concern for me because at some club events the gun needs to be at rest and slide locked back and the mag removed so the RO can confirm that weapons are clear before sending folks down range to reset things like pins. Link to comment Share on other sites More sharing options...
Milkcoma Posted March 6, 2017 Share Posted March 6, 2017 On 3/4/2017 at 6:35 AM, clw42 said: Maybe a silly question, but what do you do about locking the slide back? It's a concern for me because at some club events the gun needs to be at rest and slide locked back and the mag removed so the RO can confirm that weapons are clear before sending folks down range to reset things like pins. confused by that. in uspsa the RO checks the gun at unload and show clear, than the gun just goes in holster. no reason for the slide to be locked back. Link to comment Share on other sites More sharing options...
bsand Posted March 28, 2017 Share Posted March 28, 2017 Maybe a silly question, but what do you do about locking the slide back? It's a concern for me because at some club events the gun needs to be at rest and slide locked back and the mag removed so the RO can confirm that weapons are clear before sending folks down range to reset things like pins.At my clubs pin matches, I just unload show clear, slide forward and hammer down before placing said gun into the provided tote and stepping back. Sent from my Pixel using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now