rustybayonet Posted February 13, 2017 Share Posted February 13, 2017 I have a variety of hulls. Should I reload them per exact shell or can I find similar types and reload in larger groups? Keep it down to high brass, low brass? Will the internal of the base only change proformance or is it possible to get into the danger zone on pressure? Link to comment Share on other sites More sharing options...
bwikel Posted February 13, 2017 Share Posted February 13, 2017 You need to load each hull separately. Depending on your load they will all use a different wad based on the hull. Search for hodgdon reloading data. They have a database that will give you load data based on each hull you want to use. You may find some hulls can use the same wads but that is not likely. Also each hull will crimp a little different so the press will need to be tweaked to give you the best results for each different type. Best case scenario is to use all one kind of hull so you don't need multiple wads and you don't have the adjust the press once you get it set up well. Link to comment Share on other sites More sharing options...
fraizer15 Posted August 26, 2022 Share Posted August 26, 2022 I agree with the above. Link to comment Share on other sites More sharing options...
AHI Posted August 26, 2022 Share Posted August 26, 2022 Really . Five years later you agree. Link to comment Share on other sites More sharing options...
Farmer Posted August 27, 2022 Share Posted August 27, 2022 (edited) 53 minutes ago, AHI said: Really . Five years later you agree. Tough question. Edited August 27, 2022 by Farmer Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now