harleyfan Posted February 8, 2017 Share Posted February 8, 2017 Does anyone have a super accurate load for STI limited in 9mm? Shooting 124 great Xtreme plated with 5 grains of CAFE pistol. Fairly accurate but dirty. Cases are black. Sent from my XT1585 using Tapatalk Link to comment Share on other sites More sharing options...
Sarge Posted February 8, 2017 Share Posted February 8, 2017 Black cases typically indicate low pressure. What's book load with CFE for 124 lead bullet? Link to comment Share on other sites More sharing options...
harleyfan Posted February 8, 2017 Author Share Posted February 8, 2017 Black cases typically indicate low pressure. What's book load with CFE for 124 lead bullet?This is on the higher end of recommended load.Sent from my XT1585 using Tapatalk Link to comment Share on other sites More sharing options...
gerritm Posted February 8, 2017 Share Posted February 8, 2017 My son runs 3.4gr of Titegroup with a 147gr Blue Bullet or Xtreme HP @ 1.13 in his DVC. Very accurate and soft. About 130pf. gerritm Link to comment Share on other sites More sharing options...
harleyfan Posted February 8, 2017 Author Share Posted February 8, 2017 My son runs 3.4gr of Titegroup with a 147gr Blue Bullet or Xtreme HP @ 1.13 in his DVC. Very accurate and soft. About 130pf. gerritmThank you!Sent from my XT1585 using Tapatalk Link to comment Share on other sites More sharing options...
MikieM Posted February 10, 2017 Share Posted February 10, 2017 Believe it, or not, try 4.8 grains of WAC under a PD 115 grain JHP, and seat the bullet out to what works best in your gun. In my case it was 1.350 inches. I used this load in a match recently, in Limited division, and it was very accurate with no bad habits. P.S. Always use caution when using someone else's load data. Link to comment Share on other sites More sharing options...
twister Posted February 10, 2017 Share Posted February 10, 2017 4.0 gr. of titegroup, 125gr. HAP hollowpoint, very accurate out of my 9mm. Link to comment Share on other sites More sharing options...
Service Desk Posted February 10, 2017 Share Posted February 10, 2017 4.5 gns of Universal under a 122gn TCFP lead boolit. Load to 1.10". Shoots great in my Targetmaster. Link to comment Share on other sites More sharing options...
Darrell Posted February 12, 2017 Share Posted February 12, 2017 Plated bullets and accuracy doesn't work. Use 124 JHP either by Precision Delta, Montana Gold, or Hornady HAP. 5.0 N340, 5.4 Power Pistol, or 4.0 Tightgroup. Load to 1.080" overal length, and crimp .375-.376. Don't mix brass, use any primer. My accushadow out of my Ransom Rest will put 10 shots in 1.09"-1.53". Got 1.5" avg 5 shot group out of my G34 in the Ransom rest. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now