Scott Steele Posted February 14, 2017 Share Posted February 14, 2017 http://www.brazoscustom.com/magart/0505.htmSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
ScottieShootz Posted February 14, 2017 Share Posted February 14, 2017 so, mbx's with upward bent 2nd coil after sitting for a week fully loaded in 2 140s and 1 170: big stick salt shakered, a 140 salt shakered and the other feed properly. So, Grams guts just went back in all of them again. The one weird thing I've noticed on my 140s. The followers have the same stamp on the sides, but one of my tubes only works properly with the follower that shipped with it. If i use the follower from a different tube, it does not slide all the way up in the tube. Grams guts work in all of them without issue (these have the nub removed so no slide lock on them) Link to comment Share on other sites More sharing options...
djbb98 Posted February 15, 2017 Author Share Posted February 15, 2017 22 hours ago, ScottieShootz said: so, mbx's with upward bent 2nd coil after sitting for a week fully loaded in 2 140s and 1 170: big stick salt shakered, a 140 salt shakered and the other feed properly. So, Grams guts just went back in all of them again. The one weird thing I've noticed on my 140s. The followers have the same stamp on the sides, but one of my tubes only works properly with the follower that shipped with it. If i use the follower from a different tube, it does not slide all the way up in the tube. Grams guts work in all of them without issue (these have the nub removed so no slide lock on them) I had that happen a few times, but im still using the same followers hoping that isn't going to happen anymore. I also had a round pop below the follower once and I had to take the magazine apart to get it out. It was really odd and don't know how it happened Link to comment Share on other sites More sharing options...
Pirate Posted February 18, 2017 Share Posted February 18, 2017 I have one MBX in 40 and 5 STI mags with the factory springs, Dawson follower and TTI pads. All feed fine and hold 20 re loadable with no hold open on empty. Link to comment Share on other sites More sharing options...
Scott Steele Posted February 26, 2017 Share Posted February 26, 2017 So far the Grams spring and follower is working in my MBX magazine tube.It's 21 rounds reloadable.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Mosig Posted February 28, 2017 Share Posted February 28, 2017 See a lot of mbx Link to comment Share on other sites More sharing options...
Fuzz Posted April 11, 2017 Share Posted April 11, 2017 Single Stack 40 s&w Tripp Corey mags are unbeatable. Link to comment Share on other sites More sharing options...
427Cobra Posted April 13, 2017 Share Posted April 13, 2017 9mm 140mm STI tubes, Taran guts and 4mm base pad equal 23 rounds Link to comment Share on other sites More sharing options...
sstephns Posted April 13, 2017 Share Posted April 13, 2017 Mbx, but I did have to tune the lips. Rounds were going vertical occasionally. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now