tnoble Posted January 16, 2017 Share Posted January 16, 2017 Broke the extractor on my psa 9mm over the weekend. Psa won't send the part, have to send the entire bolt in for repair. Got a RA number but would rather replace on my own Instead of sending the whole bolt. Is there something special about replacing this extractor? Looks like it's held in with a pin, shouldn't be an issue??? Does anyone know if another brand extractor will fit? Would like to maybe also get a spare. kinda a PIA to send it in for an extractor repair. Thanks. Link to comment
bmiller Posted January 16, 2017 Share Posted January 16, 2017 (edited) Cmmg, JP are the same design. Cmmg makes a replacement part kit for their bolts, they look to be working off the same prints. Edited January 16, 2017 by bmiller Link to comment
tnoble Posted January 18, 2017 Author Share Posted January 18, 2017 I ordered a kit from CMMG. Will let everyone know if it fits when I get it. Thanks, Link to comment
Flatland Shooter Posted January 18, 2017 Share Posted January 18, 2017 (edited) Brownells also offers the CMMG bolt rebuild kit. http://www.brownells.com/rifle-parts/receiver-parts/parts-kits/repair-parts-kits/ar-15-m16-mk9-9mm-bolt-rehab-kit-prod65677.aspx Recently went on backorder as is the Colt 9mm firing pin and extractor. Edit: Just noticed Optics Planet has the CMMG kit in stock at a better price. Edited January 18, 2017 by Flatland Shooter Link to comment
Bamboo Posted January 18, 2017 Share Posted January 18, 2017 Primary Arms also sells CMMG 9mm bolt rebuild kits and the extractor by itself...although it is only 10 bones more for the rebuild kit that also has the firing pin and other parts. Link to comment
tnoble Posted January 18, 2017 Author Share Posted January 18, 2017 Saw brownells was out, just ordered the kit direct from CMMG. Everyone seemed to be priced the same. Thanks, Link to comment
tnoble Posted January 20, 2017 Author Share Posted January 20, 2017 Just received the parts from CMMG after only 2 days, WOW. Brownells would be another week! Extractor is slightly different in apperance, dimensions seem to be the same. Dummy rounds seem to load and extract/eject fine. Will live fire test this weekend. Thanks, Link to comment
rishii Posted January 20, 2017 Share Posted January 20, 2017 That's good to know I've been wanting to get a spare extractor and wasn't sure if the cmmg was the same type Link to comment
Flatland Shooter Posted January 20, 2017 Share Posted January 20, 2017 4 hours ago, tnoble said: Just received the parts from CMMG after only 2 days, WOW. Brownells would be another week! Extractor is slightly different in apperance, dimensions seem to be the same. Dummy rounds seem to load and extract/eject fine. Will live fire test this weekend. Thanks, Do the other parts in the kit also look like they will fit? Link to comment
tnoble Posted January 21, 2017 Author Share Posted January 21, 2017 It apears that the other parts will fit, however I didn't pull the firing and test fit. You can order the extractor by its self, I just gambled the extra $12 for the whole kit. Figured it wouldn't hurt to have an extra firing pin. Also have a couple people that would take the CMMG pin off my hands if needed...... It apears to be a stainless steel pin vs the blue that some have mentioned come in there guns thanks, Link to comment
Flatland Shooter Posted January 21, 2017 Share Posted January 21, 2017 I have the Colt factory firing pin and extractor on backorder with Brownells. When I ordered it I did not know about the CMMG 9mm bolt rehab kit. Since they are in stock, I went ahead and order a set. Thanks. Bill Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now