gator11 Posted December 15, 2016 Share Posted December 15, 2016 Just picked up the PC ported C.O.R.E 9mm 4.25 barrel. What red dot will cowitness without any mods and what mounting plate are you using? Planning on shooting some steel with it. Link to comment Share on other sites More sharing options...
JMike Posted December 15, 2016 Share Posted December 15, 2016 All of the mounting plates that came with the pistol would be your guide. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
VegasMoFo Posted December 16, 2016 Share Posted December 16, 2016 Ive had the Trijicon and the Vortex venom... they both cowitness Trijicon plate is marked in the manual and the Vortex uses the Burris Plate Link to comment Share on other sites More sharing options...
Mully383 Posted December 16, 2016 Share Posted December 16, 2016 The original Delta point (if you can find one) and the vortex viper mount fine and cowitness. Viper not as good of a co witness though. Link to comment Share on other sites More sharing options...
gator11 Posted December 16, 2016 Author Share Posted December 16, 2016 Purchased the gun used and unfortunately didn't have any paperwork or box, it was cheap though so I didn't mind. Went to my local gun dealer and he recommended the Burris Fastfire III. Didn't have any in stock but ordered me one. Anyone using that set up? Link to comment Share on other sites More sharing options...
pete627 Posted December 16, 2016 Share Posted December 16, 2016 I have a JPoint on a 5 inch Core w/ the #2 plate. It co-witnesses just fine. IMHO ... you may find co-witness not a such biggie further down the road. Link to comment Share on other sites More sharing options...
pete627 Posted December 16, 2016 Share Posted December 16, 2016 (edited) Edited December 16, 2016 by pete627 Sorry ... screwed up ... double post ... Link to comment Share on other sites More sharing options...
gator11 Posted December 16, 2016 Author Share Posted December 16, 2016 5 hours ago, pete627 said: I was hoping someone would post this for me, thank you. Link to comment Share on other sites More sharing options...
hkvp9 Posted December 17, 2016 Share Posted December 17, 2016 Anyone mounted a Cmore RTS on a CORE model ? Link to comment Share on other sites More sharing options...
StealthyBlagga Posted December 21, 2016 Share Posted December 21, 2016 I have an original DeltaPoint and it is nearly-perfect once installed and zeroed, BUT there are two big negatives: 1) Adjusting zero is an epic PITA due to the CORE rear sight blocking direct access to the locking screws. I had to make a special tool. 2) The whole sight has to be removed from the slide to change the battery. Link to comment Share on other sites More sharing options...
KampKustoms Posted April 3, 2017 Share Posted April 3, 2017 Really digging the Vortex Viper 6 MOA on mine. Great cowitness and price. I think it was #5 plate and "C" type screws. Link to comment Share on other sites More sharing options...
ddc Posted April 3, 2017 Share Posted April 3, 2017 I don't have any personal feedback but a guy I shoot with (who shoots CO with an M&P) recently changed from a Trijicon RMR over to a Vortex Viper 3 MOA. He likes the Viper better but will be changing that over to the 6 MOA version shortly. He was impressed with the price/performance ratio of the Viper. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now