jw3378 Posted November 17, 2016 Share Posted November 17, 2016 First off, if this is in the wrong thread please correct me. Howdy gentlemen, I've recently jumped back into production compdivision after a long hiatus away from the sport. I have shot multiple local matches using my fathers Limited belt rig adjusted to production legal. I've decided this hobby is one that is easily accessible to me and worth the purchase of my own rig (and pops wants all his stuff back).Id like to put together an entire belt rig but am looking for recommendations on some parts and would like to make sure im not forgetting anything. I am currently shooting a stock 2 and have a comp-tac holster with the original drop offset mount already Equipment I've consider- -Belt- not sure what brand on this one. Have heard greet things about CR speed and DAA, any others? -Pouches-ghost, cr speed, DAA Suggestions in the three? -BOSS Holster Hangar -Shot time- Really need help here!!! -Baseplates for stock 2 magazines. Brands? Thanks Gentlemen and God bless. Link to comment Share on other sites More sharing options...
Mikeski Posted November 18, 2016 Share Posted November 18, 2016 Welcome and glad to have you here. I started with a black scorpion belt because that's what i could find on amazon when i was first starting out. I used an Uncle mikes basic kydex holster and double mag pouches a first. Once I got into this and started asking other shooters at my local club then I started to upgrade from there. What makes it worse is i've always been a gear guy so I like to try new things. Which is why I now have 4 rigs. Limited/Open, Production, Single Stack and 3 gun. I run the CR speed for my production & single stack which I like. Link to comment Share on other sites More sharing options...
JupiterAdam Posted November 18, 2016 Share Posted November 18, 2016 Although you may want to look at and try out various products, I believe that you can't go wrong with a CR speed belt, CR speed pouches and a CED 7000 timer. Good luck, Adam. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted November 18, 2016 Share Posted November 18, 2016 Hello: The Shooters Connection belt is as good as any of them and less expensive than most. I like DAA mag pouches and also Safariland. Holsters I like Blade Tech, Safariland and Comp Tac. Thanks, Eric Link to comment Share on other sites More sharing options...
jw3378 Posted November 18, 2016 Author Share Posted November 18, 2016 Thanks gentlemen. Sadly I fall into the gear guy category as well. The rig I was borrowing from my father was DAA belt and the DAA metal pouches which were really nice, but I really don't know if they were worth extra coin. I will look into the shooter connection belt. Does anyone other than ghost offer the bullets out option? Link to comment Share on other sites More sharing options...
js1130146 Posted November 18, 2016 Share Posted November 18, 2016 29 minutes ago, jw3378 said: Does anyone other than ghost offer the bullets out option? I believe this is an option with DAA mag pouches as well. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted November 18, 2016 Share Posted November 18, 2016 Hello: DAA mag pouches allow you to do bullets out as well. You can get the DAA racer pouches which are a little cheaper. Thanks, Eric Link to comment Share on other sites More sharing options...
Mulligan03 Posted January 18, 2017 Share Posted January 18, 2017 Agree with others racemaster pouches are the way to go.. have been really pleased with mine Link to comment Share on other sites More sharing options...
scooterj Posted January 18, 2017 Share Posted January 18, 2017 The Ernie Hill/Guga Ribas pouches can be set up for Bullets out. Link to comment Share on other sites More sharing options...
470nitro Posted January 18, 2017 Share Posted January 18, 2017 I shoot bullets-out and had used Guga Ribas pouches and switched to DAA two years ago. Best decision I could have made. The Guga pouches were well made but for me they kept shifting/rotating where the pouch tightens down to the belt clamp, no matter how tight I tightened them. This may have had more to do with my belly size than the design of the pouch assembly. Again, for me the Guga pouches worked well for years.....just not as well as the DAA once I tried them. Link to comment Share on other sites More sharing options...
470nitro Posted January 18, 2017 Share Posted January 18, 2017 For a belt, I own both CR Speed and DAA and haven't noticed a difference. They look and feel nearly identical. If I were to buy new, I'd probably go with Shooters Connection as I doubt I'd personally notice the difference. Link to comment Share on other sites More sharing options...
BBQRibs Posted January 18, 2017 Share Posted January 18, 2017 (edited) Personal preference is DAA belts and pouches (Racers) over CR Speed. Some guys I shoot with grabbed Shooters Connection belts. They like 'em and they cost less. That stock holster hanger works alright but you'd be glad you got a BOSS. It's stable as hell and adjusts nicely. I dig the big screen on top of the Comp. Electronics pocket pro II. Easy for solo live or dry fire practice. Cool you're getting back into it, have fun! Edited January 18, 2017 by BBQRibs Link to comment Share on other sites More sharing options...
dbagwell Posted January 19, 2017 Share Posted January 19, 2017 +1 CR Speed belts I've always used the CR Speed mag pouches too because I like how they are compatible with a wide variety of magazines by changing out or removing the inserts - a nice feature if I ever choose to shoot a different division/gun in the future. I recently upgraded the mag pouch hangers to their new C-Bax design and they're awesome...I highly recommend those. I started with a Blade-Tech DOH holster, however, the stingray hanger and the stock DOH adapter was crap! I have upgraded to the Boss hanger and I feel like I finally have the perfect rig with all the bugs worked out. Everything is tight and solid. I have a Pact timer for live fire and I use the Surefire Shot Timer app on my phone for dry fire practice. You should checkout Taylor Freelance if you're looking for production legal baseplates. Link to comment Share on other sites More sharing options...
taxil343 Posted February 1, 2017 Share Posted February 1, 2017 My production rig: DAA belt, DAA Racer pouches bullets out, blade tech pouch on a boss hanger, and an ear pro hanger/clip. For a timer, I love my Pocket Pro II. With my stock 2 I use the Shockbottle base pads. Link to comment Share on other sites More sharing options...
Mosig Posted February 19, 2017 Share Posted February 19, 2017 Shooters connection belt, ghost pouches, and hanger from Matt Lee. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now