PCC Firing Pin

[Kmarsh1966]

Word of warning, I am running a CMMG MK 9 setup, and had a firing pin break.   Roughly 700-1000 rounds on this purchased brand new gun. Mine happened about 1 week a buddies on a Palmetto State Armory.   Cant go to the local Riflegear store and pick up another.  These seem to be manufacturer specific.   

Order 1-2 extras to keep as spare.  

Hopefully the next one will hold up longer.

IF anyone knows of a different source for replacement parts, I would appreciate the info.

[carharttfarmer]

http://ar15xtreme.com/product/ar-platform-9mm-firing-pin/

 

Works in my spinta bolt

[Les Snyder]

I would offer a wild ass guess and say that most 9mm firing pins are Colt clones...I got a replacement from NFA after a break of the blued OEM pin, which they replaced with a stainless pin, that is identical to the Colt part I got from Brownells...might be a good idea to see if we can cross check the common parts and make an archival list

[Kmarsh1966]

6 minutes ago, carharttfarmer said:

http://ar15xtreme.com/product/ar-platform-9mm-firing-pin/

 

Works in my spinta bolt

That looks exactly like my CMMG.   THANKS!!!!

[Neil E.]

Has anyone had there firing pin puncture primers? I believe mine did that and melted the tip. I have just received a new spinta BCG and dropped the hammer on a empty case with a new primer and the indent is quit deep. I will probably need to shorten the firing pin.

[JAF1680]

Mine broke at 2000 rounds and I replaced it with a JP I ordered both but the JP worked.  It was $2 more and I hope it holds up a little better.