Garmil Posted November 12, 2016 Author Share Posted November 12, 2016 2 hours ago, RJH said: While the gap does look wider on the one side, could it be that the mount screws were a little long at one time? Also, I would shoot the crap out of either way, while the fitting may not be perfect I have seen that type of rub on a lot of guns that shot fine. Good luck That could be part of it, the lower rub at least. The upper line though is in line with the dust cover and longer than the other side so it's definitely dust cover. Well that's reassuring guess it's not too uncommon. The rub and the finish overall were bugging me so I've been polishing it all down anyway, the rubs are gone now. Link to comment Share on other sites More sharing options...
Garmil Posted November 27, 2016 Author Share Posted November 27, 2016 Frame is stripped down ready for coating. Slide is off getting popple holes and slide cuts. Got a new set of alumagrips and fit them for the magwell. Link to comment Share on other sites More sharing options...
KampKustoms Posted January 20, 2017 Share Posted January 20, 2017 On 11/26/2016 at 7:08 PM, Garmil said: Frame is stripped down ready for coating. Slide is off getting popple holes and slide cuts. Got a new set of alumagrips and fit them for the magwell. Just me or is the magwell... uh... backwards? Link to comment Share on other sites More sharing options...
Garmil Posted January 20, 2017 Author Share Posted January 20, 2017 34 minutes ago, KampKustoms said: Just me or is the magwell... uh... backwards? Lol good catch. The correct way it's real tight and I took the easy route Link to comment Share on other sites More sharing options...
KampKustoms Posted January 20, 2017 Share Posted January 20, 2017 Garmil, how is the build coming along? My dad just got his old Caspian back after selling to a friend a couple years ago. His was built back in '98 by Wayne Burquist in Naples, FL. Link to comment Share on other sites More sharing options...
Garmil Posted January 20, 2017 Author Share Posted January 20, 2017 Going great it's all finished. Link to comment Share on other sites More sharing options...
KampKustoms Posted January 20, 2017 Share Posted January 20, 2017 That is one sweet blaster! Link to comment Share on other sites More sharing options...
Bamboo Posted January 21, 2017 Share Posted January 21, 2017 ....And how does she shoot? Link to comment Share on other sites More sharing options...
Garmil Posted January 22, 2017 Author Share Posted January 22, 2017 On 1/20/2017 at 8:52 AM, KampKustoms said: That is one sweet blaster! thank you! On 1/20/2017 at 4:21 PM, Bamboo said: ....And how does she shoot? I wish I knew lol been too busy still haven't put many rounds through it Link to comment Share on other sites More sharing options...
zzt Posted January 22, 2017 Share Posted January 22, 2017 That is a nice looking gun. What finish did you use? Link to comment Share on other sites More sharing options...
Garmil Posted January 26, 2017 Author Share Posted January 26, 2017 H&M black nitride Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now