mike4045 Posted September 29, 2016 Share Posted September 29, 2016 Which mount do you use to mount a vortex venom on the P09? Thinking of trying the new carry optics divisions. Link to comment Share on other sites More sharing options...
mro111lland Posted September 29, 2016 Share Posted September 29, 2016 Got mine from springer precision is the same mount for the cz75b Link to comment Share on other sites More sharing options...
dave33 Posted September 29, 2016 Share Posted September 29, 2016 +1 for springer precision mounts. Ive had my FF3 on two different P-09's, a .40 and a 9mm, and it just stays rock solid. Ive put untold thousands of rounds through those pistols and not a single problem. Im running some fairly spicy 9mm loads and it never gets loose or loses zero. Just double check it will work with your choice of optic. A lot of guys have been having their slide milled with good success. If there is no one here who does this, you can find some folks on the czfirearms.us site. It gives a little cleaner look and gets the dot closer to the slide, Im considering it myself and may do it during the winter. Link to comment Share on other sites More sharing options...
PrimaryBruce Posted September 29, 2016 Share Posted September 29, 2016 1 hour ago, dave33 said: +1 for springer precision mounts. Ive had my FF3 on two different P-09's, a .40 and a 9mm, and it just stays rock solid. Ive put untold thousands of rounds through those pistols and not a single problem. Im running some fairly spicy 9mm loads and it never gets loose or loses zero. Just double check it will work with your choice of optic. A lot of guys have been having their slide milled with good success. If there is no one here who does this, you can find some folks on the czfirearms.us site. It gives a little cleaner look and gets the dot closer to the slide, Im considering it myself and may do it during the winter. We've milled dozens of 07 & 09 slides. Link to comment Share on other sites More sharing options...
M1A4ME Posted September 29, 2016 Share Posted September 29, 2016 Mine's an RMR on a P09 (got a P07 done, too) done by Primary Machine. They also milled the slide for the rear sight and installed the taller sights as well as cerakoting the slide OD Green. The P07 is done the same but in FDE. Link to comment Share on other sites More sharing options...
mike4045 Posted October 2, 2016 Author Share Posted October 2, 2016 On 9/29/2016 at 9:48 AM, PrimaryBruce said: of Once slide is milled can you go back to iron sights? Link to comment Share on other sites More sharing options...
PrimaryBruce Posted October 2, 2016 Share Posted October 2, 2016 27 minutes ago, mike4045 said: Once slide is milled can you go back to iron sights? Of you are concerned about urns a new dovetail can be milled. 90% of people we mill slides for aren't worried about irons as they are using the guns for range use and/or competition only. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now