DKnoch Posted August 20, 2016 Share Posted August 20, 2016 Does anybody have a minor power factor load for 125 grain lead with cfe pistol? Ive been loading 3.6 grains of titegroup, but am running low on that. I'm thinking I would be fine around 3.9 or 4 grains of cfe pistol for minor pf. I have a match on sunday, so i may just use the last bit of titegroup and get more before the NC sectional or work up a load for cfe pistol before then. Thanks for any info you can share Link to comment Share on other sites More sharing options...
Bkreutz Posted August 20, 2016 Share Posted August 20, 2016 5 gr of CFE under a 124 gives me a 136PF (this is on a plated bullet, but they should be similar) Link to comment Share on other sites More sharing options...
pskys2 Posted August 20, 2016 Share Posted August 20, 2016 My experience is Plated bullets take a couple of tenths more than coated lead bullets. So you may see an extra 30 f/s. Link to comment Share on other sites More sharing options...
ruleyoutoo1911 Posted August 22, 2016 Share Posted August 22, 2016 I had to use 4.4gr CFE Pistol to make PF in a CZ 75, OAL was 1.060 Bear Creek 125 gr Moly coated bullets. Link to comment Share on other sites More sharing options...
3guns Posted August 23, 2016 Share Posted August 23, 2016 Out of my G 34 and stock barrel: 125 gr Blue Bullet 4.4 CFE pistol, CCI Primers, Win brass, 1.15 OAL, AVG MV 1054, PF 131 4.8 CFE pistol, AVG MV 1107, PF 138 Link to comment Share on other sites More sharing options...
valerko Posted August 23, 2016 Share Posted August 23, 2016 4g under 147g Acme makes 131 PF , so I'd say at least 4.4g and up Link to comment Share on other sites More sharing options...
cjdaniel78 Posted August 26, 2016 Share Posted August 26, 2016 125 gr RN SNS 4.7 gr CFE 1.090" COAL Primers, Fed, Win or CCI. Magnum or regular seem to have no appreciable effect. I have no idea what the particulars our, but I know it makes over 125 PF out of my Limited Pro. Link to comment Share on other sites More sharing options...
Steve RA Posted August 26, 2016 Share Posted August 26, 2016 3.2 of Clays under a 130gr LSWC goes 131PF for me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now