aandabooks Posted August 2, 2016 Share Posted August 2, 2016 I've got a G35 coming that I would like to use as a potential backup gun for Production. I already have a load established for .40 major for my Limited gun that should work in the G35. I will be using 200gr S&S bullets and a fast powder. Probably Ramshot Competition or Zip. I only need to get to 625 FPS to make minor. Will the cases even be sealing to the chamber walls? What lb recoil spring should I be getting? Link to comment Share on other sites More sharing options...
Hallz Posted August 3, 2016 Share Posted August 3, 2016 I have had coated bullets down to 107pf with 11lbs spring. Link to comment Share on other sites More sharing options...
aandabooks Posted August 3, 2016 Author Share Posted August 3, 2016 What bullet and powder? Link to comment Share on other sites More sharing options...
mach1soldier Posted August 3, 2016 Share Posted August 3, 2016 Use lighter bullets is my advice Link to comment Share on other sites More sharing options...
Garmil Posted August 3, 2016 Share Posted August 3, 2016 180s with n310 at 775 fps worked well for me. any slower and my sd was all over the place Link to comment Share on other sites More sharing options...
FortyOverUnder Posted August 3, 2016 Share Posted August 3, 2016 For production... 180gr pills with 3.0gr of Clays. It can't get better than that. Link to comment Share on other sites More sharing options...
Bullets Posted August 3, 2016 Share Posted August 3, 2016 For production... 180gr pills with 3.0gr of Clays. It can't get better than that. does that even make minor pf? Sounds too light to me. Im using 4.0 gr of n320 to make 129pf with a 180. Link to comment Share on other sites More sharing options...
FortyOverUnder Posted August 3, 2016 Share Posted August 3, 2016 For production... 180gr pills with 3.0gr of Clays. It can't get better than that. does that even make minor pf? Sounds too light to me. Im using 4.0 gr of n320 to make 129pf with a 180. 133pf. It was also my IDPA load. Clays is easier to get and cheaper than n320. Much softer than n320 also. Link to comment Share on other sites More sharing options...
Hallz Posted August 5, 2016 Share Posted August 5, 2016 For production... 180gr pills with 3.0gr of Clays. It can't get better than that. 3gr Clays with 180 plated did not make PF in any if my guns, just FYI. Had to go to 3.2 Link to comment Share on other sites More sharing options...
FortyOverUnder Posted August 5, 2016 Share Posted August 5, 2016 For production... 180gr pills with 3.0gr of Clays. It can't get better than that. 3gr Clays with 180 plated did not make PF in any if my guns, just FYI. Had to go to 3.2 Canadian Clays or Australian Clays? I'll have to re chrono my Canadian stuff. Also what was your OAL? Link to comment Share on other sites More sharing options...
Yeti Posted August 6, 2016 Share Posted August 6, 2016 I prefer to keep 40 Minor ~136-140PF. 165gr around 840fps or 180's around 770fps. More reliable & accurate. Clays or Clay Dot both work well in that 3._gr zone. Link to comment Share on other sites More sharing options...
Hallz Posted August 7, 2016 Share Posted August 7, 2016 For production... 180gr pills with 3.0gr of Clays. It can't get better than that. 3gr Clays with 180 plated did not make PF in any if my guns, just FYI. Had to go to 3.2Canadian Clays or Australian Clays?I'll have to re chrono my Canadian stuff. Also what was your OAL? The new stuff and 1.128-1.130 Link to comment Share on other sites More sharing options...
phil plesetz Posted October 16, 2016 Share Posted October 16, 2016 I used 200 grain ACME Bullet with 3.0 of WST at 650 fps which makes minor. Accurate in my G35 and CZ P07. Right from the Hodgdon reload data online. Link to comment Share on other sites More sharing options...
Audia6 Posted October 16, 2016 Share Posted October 16, 2016 3.1 Clays and i got 160pf out of G35 Link to comment Share on other sites More sharing options...
phil plesetz Posted October 19, 2016 Share Posted October 19, 2016 what bullet? Link to comment Share on other sites More sharing options...
Postal Bob Posted October 20, 2016 Share Posted October 20, 2016 (edited) I just chrono'd some loads using 3.2gr titegroup, over a 180 gr ibejihead bullet. Averaged 768 fps, or 138 pf. Didn't test it yet for accuracy. Edited October 21, 2016 by Postal Bob Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now