Kmarsh1966 Posted August 1, 2016 Share Posted August 1, 2016 I have recently acquired a new PCC. It uses Colt SMG Magazines. I don't know what I need to order to use as a Mag Pouch. I shoot an XDM and it is too big for that. Thanks for any info Kyle Link to comment
Tech32 Posted August 1, 2016 Share Posted August 1, 2016 The double alpha racers with the thin spacer work perfect for me Link to comment
bwikel Posted August 1, 2016 Share Posted August 1, 2016 I'm using my ghost 360 mag holsters. I had to increase the tension some so they don't rotate as easy since the 32 rd mags get top heavy. I had one turn on me during a stage before I increased the tension but it still held the mag in even though it was upside down. Link to comment
SlappyAbbot Posted August 3, 2016 Share Posted August 3, 2016 (edited) I am using one of these for now: https://www.amazon.com/gp/product/B00V5I8VMA/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 It can be a bit of a pain to get the mag in, but retrieval is smooth. Edited August 3, 2016 by SlappyAbbot Link to comment
sousa Posted August 3, 2016 Share Posted August 3, 2016 I'm using Safariland 773 pouches for Glock mags with my Uzi mags. Just a bit more tension on the screws and they are fine. Link to comment
Kmarsh1966 Posted August 20, 2016 Author Share Posted August 20, 2016 Thanks. I found they work in ones for 2011's also Link to comment
Kingman Posted August 20, 2016 Share Posted August 20, 2016 I have made a few for some of the guys. Most are not bad, the first Sig MPX mags took me some time. Link to comment
Matt1911 Posted September 23, 2016 Share Posted September 23, 2016 (edited) The CR speed pouches fit for my M&P mags seem to fit the colt style mags pretty well too. Edited September 23, 2016 by Matt1911 Link to comment
lucas Posted September 23, 2016 Share Posted September 23, 2016 On August 20, 2016 at 3:08 PM, Kmarsh1966 said: Thanks. I found they work in ones for 2011's also I discovered that as well with my 771 safariland. Link to comment
Rangerdug Posted September 25, 2016 Share Posted September 25, 2016 Does anyone have ideas for MPX mags? The Sig(bladetech) would be nice but you can't put any cant on them.Sent from my iPhone using Tapatalk Link to comment
ChuckS Posted September 26, 2016 Share Posted September 26, 2016 1 hour ago, Rangerdug said: --- but you can't but any cant on them. --- Link to comment
Rangerdug Posted September 26, 2016 Share Posted September 26, 2016 Put... You can't put any cant on them(especially if you using tek lok)Sent from my iPhone using Tapatalk Link to comment
jliew08 Posted September 26, 2016 Share Posted September 26, 2016 Does anyone have ideas for MPX mags? The Sig(bladetech) would be nice but you can't put any cant on them.Sent from my iPhone using TapatalkCheck out nerd. http://www.weare-nerd.com/shop/magazine-mausoleum Link to comment
shutr Posted September 26, 2016 Share Posted September 26, 2016 Doesn't look like they are adjustable for cant (MPX). Link to comment
fishhunter3 Posted September 27, 2016 Share Posted September 27, 2016 On 9/25/2016 at 5:37 PM, Rangerdug said: Does anyone have ideas for MPX mags? The Sig(bladetech) would be nice but you can't put any cant on them. Sent from my iPhone using Tapatalk a drill and a bit and you have a cant Link to comment
shutr Posted September 27, 2016 Share Posted September 27, 2016 Yup, same thing I did. Link to comment
Dannybot Posted October 2, 2016 Share Posted October 2, 2016 The Colt pattern mags fit in a Blackhawk mag pouch. Link to comment
Davidp1911 Posted July 16, 2018 Share Posted July 16, 2018 I use my open pouches - DA double stack for glock mags Link to comment
Timido Posted July 16, 2018 Share Posted July 16, 2018 I like the Coda pouch. Works for both Glock and Colt Link to comment
Tampa-XD45 Posted July 16, 2018 Share Posted July 16, 2018 I use the twin Springfield XD 45 ACP pouch that came with the pistol. Image link Link to comment
JAFO Posted July 16, 2018 Share Posted July 16, 2018 I tried a Double Alpha magnet, but since I use Glock mags it wasn't a good solution and I switched to their Racer pouch. Metal-bodied Colt mags would work fine with the Racers or the magnet. Link to comment
biggulp Posted July 17, 2018 Share Posted July 17, 2018 (edited) I had the same question after my first PCC match that involved movement. Nothing blows your stage like having your reload fall out while you're moving.. Found out the hard way that a fully loaded 32 round Colt mag is to much for the Ghost 360 pouches. After a bit of research and checking out what the local guys were using, I ran across the Comp-Tac PCC PLM pouches (https://comp-tac.com/pcc-plm-magazine-pouch-pistol-caliber-carbine-push-button-locking-mount-owb-kydex/). I've got 2 of them, I carry 1 mag at a slight angle in front of my hip, and a "oh crap" 2nd mag nearly horizontal on the front (angled upward slightly so that I can take a knee and not have it jab me). I've run several matches with them and they've worked extremely well for me. Enough tension to hold the mags securely, but I'm still able to reload smoothly without having to yank on them. Edited July 17, 2018 by biggulp Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now