Justinmac13 Posted May 26, 2016 Share Posted May 26, 2016 I have found a lot of load options for 180s and seem to be pretty good, I like 4.4 of clays and bbi 180s. I have some 200's I want to try out but there is far less load data available. Do any of you want to share your powder combo for 200 coated? Link to comment Share on other sites More sharing options...
Justinmac13 Posted May 26, 2016 Author Share Posted May 26, 2016 I have found a lot of load options for 180s and seem to be pretty good, I like 4.4 of clays and bbi 180s. I have some 200's I want to try out but there is far less load data available. Do any of you want to share your powder combo for 200 coated? I am currently loading to 1.195 and .4215 crimp out of an sti framed 5" gun. Looking for 170ish pf Link to comment Share on other sites More sharing options...
Aggieddad02 Posted May 26, 2016 Share Posted May 26, 2016 Loading 200 gr BBI with N320. I use 4.37 gr of N320 at an OAL of 1.2. Shot this last weekend at the MS Classic and had a 173 PF at chrono Link to comment Share on other sites More sharing options...
earthshine402 Posted May 27, 2016 Share Posted May 27, 2016 3.55 gr Clays with .400 200gr Ibejiheads loaded to 1.200" gets about 169.5 PF for me. Link to comment Share on other sites More sharing options...
Justinmac13 Posted May 27, 2016 Author Share Posted May 27, 2016 3.55 gr Clays with .400 200gr Ibejiheads loaded to 1.200" gets about 169.5 PF for me. Have you ran through quite a few of these, I have heard clays can be petty touchy when going over 180's? I'd like to try this load out. Link to comment Share on other sites More sharing options...
earthshine402 Posted May 27, 2016 Share Posted May 27, 2016 3.55 gr Clays with .400 200gr Ibejiheads loaded to 1.200" gets about 169.5 PF for me. Have you ran through quite a few of these, I have heard clays can be petty touchy when going over 180's? I'd like to try this load out. Yea probably at least 500. I have recently switched to Open, but the 200 gr With Clays i like best so far in Limited. A little softer and most accurate i have loaded. Link to comment Share on other sites More sharing options...
Foxj66 Posted May 27, 2016 Share Posted May 27, 2016 Justin, Bob shoots 200s in his ltd gun, would be good to ask him. I tried some but prefer the feel of my 180s Link to comment Share on other sites More sharing options...
Justinmac13 Posted May 27, 2016 Author Share Posted May 27, 2016 Justin, Bob shoots 200s in his ltd gun, would be good to ask him. I tried some but prefer the feel of my 180s I asked Bob but he uses wst, that's a powder I have not been able to find at the two lgs's I go to. I wanted to try and use wsf, clays, ramshot comp or hp38 since I have quite a bit of all those Link to comment Share on other sites More sharing options...
seadog_99 Posted May 28, 2016 Share Posted May 28, 2016 Of that list of powders I'd give Clays first billing. The others are slower than I'd like unless I had to load short for some reason (CZ or similar short pistol). Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
wolffy1876 Posted May 28, 2016 Share Posted May 28, 2016 3.9 of claydot with 200gr blue bullets was 173 PF out of M&P 5" Link to comment Share on other sites More sharing options...
bokbok_05 Posted June 1, 2016 Share Posted June 1, 2016 Loading 4.7grs N320 @ 1.185oal for my Edge. Link to comment Share on other sites More sharing options...
Edmooberry Posted July 16, 2016 Share Posted July 16, 2016 Anybody load TG under coated 200s? Link to comment Share on other sites More sharing options...
earthshine402 Posted July 17, 2016 Share Posted July 17, 2016 Anybody load TG under coated 200s? I Chrono'd some, out of a CK Arms limited gun with KKM barrel, .400 200gr Ibejiheads, loaded to 1.20", on a 53 degrees F day. 3.6gr TG = 166.5 PF 3.8gr TG = 173.5 PF 4.0gr TG = 178.2 PF Link to comment Share on other sites More sharing options...
Edmooberry Posted July 17, 2016 Share Posted July 17, 2016 Anybody load TG under coated 200s?I Chrono'd some, out of a CK Arms limited gun with KKM barrel, .400 200gr Ibejiheads, loaded to 1.20", on a 53 degrees F day.3.6gr TG = 166.5 PF 3.8gr TG = 173.5 PF 4.0gr TG = 178.2 PF Thanks Earth! Did they shoot pretty decent? Link to comment Share on other sites More sharing options...
earthshine402 Posted July 17, 2016 Share Posted July 17, 2016 Anybody load TG under coated 200s?I Chrono'd some, out of a CK Arms limited gun with KKM barrel, .400 200gr Ibejiheads, loaded to 1.20", on a 53 degrees F day.3.6gr TG = 166.5 PF 3.8gr TG = 173.5 PF 4.0gr TG = 178.2 PF Thanks Earth! Did they shoot pretty decent? They shot OK, but I had better options.. I chose to go with Clays at about 3.55gr for 169PF - warning - only load long with Clays at major (in case you have not seen this warning yet) Link to comment Share on other sites More sharing options...
Audia6 Posted October 16, 2016 Share Posted October 16, 2016 3.4 gr Clays 200 gr BC 1.185 out of my new SV Link to comment Share on other sites More sharing options...
thormx538 Posted October 20, 2016 Share Posted October 20, 2016 4.1g N320, BBI 200gr, 1.150", 5" barrel got me PF ~165 Link to comment Share on other sites More sharing options...
noylj Posted October 20, 2016 Share Posted October 20, 2016 (edited) Yeah, here is some .40 S&W data for jacketed bullets from various manuals. Hope this helps. Bullet Weight Powder Weight Velocity Note P.F. Test COL J-all 200 2400 7.8 857 Start 171 1.130 J-all 200 2400 8.5 925 Max 185 1.130 HP-XTP 200 231/HP38 3.9 729 Start 146 1.125 Hdy HP-XTP 200 231/HP38 3.9 737 Start 147 FMJ 200 231/HP38 4.0 750 Start 150 FMJ, JHP 200 231/HP38 4.7 850 Max 170 HP-XTP 200 231/HP38 4.7 857 Max 171 1.125 Hornady 200 3N37 4.5 Start 0 TMJ 200 3N37 4.9 850 Start 170 J-all 200 3N37 5.1 857 Start 171 1.126 TMJ 200 3N37 5.1 869 Start 174 1.126 TMJ 200 3N37 5.4 909 Max 182 1.126 Hornady 200 3N37 5.5 875 Max 175 TMJ 200 3N37 5.8 969 Max 194 1.126 J-all 200 3N37 6.0 988 Max 198 1.126 TMJ 200 3N38 6.9 997 Start 199 1.126 TMJ 200 3N38 7.3 1038 Max 208 1.126 J-all 200 800X 6.3 925 Start 185 1.125 J-all 200 800X 6.3 925 Max 185 1.125 J-all 200 AA2 4.1 753 Start 151 XTP 200 AA2 4.2 717 Start 143 HP-XTP 200 AA2 4.2 734 Start 147 1.130 J-all 200 AA2 4.3 793 Max 159 XTP 200 AA2 4.7 815 Max 163 1.130 TMJ 200 AA2 4.9 791 Start 158 TMJ 200 AA2 5.4 899 Max 180 XTP 200 AA5 5.0 729 Start 146 HP-XTP 200 AA5 5.0 760 Start 152 1.130 HP-XTP 200 AA5 5.5 828 Max 166 1.130 TMJ 200 AA5 5.7 777 Start 155 TMJ 200 AA5 6.3 883 Max 177 All Hdy 200 AA7 6.6 700 Start 140 Hdy HP-XTP 200 AA7 6.7 748 Start 150 1.130 HP-XTP 200 AA7 6.7 779 Start 156 1.130 HP-XTP 200 AA7 7.4 850 Max 170 1.130 TMJ 200 AA7 7.5 819 Start 164 J-all 200 AA7 7.5 846 Start 169 1.135 J-all 200 AA7 8.3 931 Max 186 1.135 All Hdy 200 AA7 8.8 950 Max 190 Hdy HP-XTP 200 AA9 8.3 759 Start 152 1.130 HP-XTP 200 AA9 8.3 783 Start 157 1.130 HP-XTP 200 AA9 9.2 863 Max 173 1.130 TMJ 200 AA9 9.5 838 Start 168 J-all 200 AA9 9.5 865 Start 173 1.135 J-all 200 AA9 10.6 952 Max 190 1.135 FMJ 200 Am. Select 4.2 845 Max 169 1.130 Hdy 200 AutoComp 4.8 838 Start 168 Hdy 200 AutoComp 5.2 894 Max 179 All Hdy 200 Blue Dot 5.4 700 Start 140 All Hdy 200 Blue Dot 7.1 950 Max 190 J-all 200 Blue Dot 7.2 880 Start 176 1.130 J-all 200 Blue Dot 7.9 960 Max 192 1.130 FMJ 200 Bullseye 4.1 Start 0 J-all 200 Bullseye 4.2 875 Start 175 1.130 J-all 200 Bullseye 4.6 945 Max 189 1.130 FMJ 200 Green Dot 3.9 Start 1.130 FMJ 200 Green Dot 4.3 890 Max 178 1.130 FMJ 200 Herco 5.2 Start J-all 200 Herco 5.3 876 Start 175 1.130 J-all 200 Herco 5.8 955 Max 191 1.130 Hdy XTP-HP 200 HS6 5.0 Start All Hdy 200 HS6 5.3 700 Start 140 HP-XTP 200 HS6 5.5 795 Start 159 1.125 Hdy HP-XTP 200 HS6 5.5 810 Start 162 FMJ 200 HS6 5.7 835 Start 167 Hdy XTP-HP 200 HS6 5.9 890 Max 178 All Hdy 200 HS6 6.3 850 Max 170 HP-XTP 200 HS6 6.3 900 Max 180 1.125 FMJ 200 HS6 6.4 905 Max 181 JHP 200 HS6 6.8 902 Max 180 FMJ 200 HS7 6.6 790 Start 158 J-all 200 HS7 6.6 812 Start 162 1.130 JHP 200 HS7 7.4 907 Max 181 J-all 200 HS7 7.5 910 Max 182 1.130 Hdy HP-XTP 200 Longshot 5.0 836 Start 167 XTP 200 Longshot 6.0 954 Max 191 TMJ 200 N105 7.1 Start 0 J-all 200 N105 7.5 1069 Start 214 1.126 TMJ 200 N105 7.6 1053 Start 211 1.126 TMJ 200 N105 7.7 1076 Max 215 1.126 TMJ 200 N105 7.9 1116 Max 223 1.134 J-all 200 N105 8.0 1132 Max 226 1.126 Zero 200 N320 4.6 851 Start 170 1.185 All Hdy 200 N340 4.1 700 Start 140 TMJ 200 N340 4.6 857 Start 171 TMJ 200 N340 4.6 876 Start 175 1.126 J-all 200 N340 4.7 864 Start 173 1.126 All Hdy 200 N340 4.8 850 Max 170 TMJ 200 N340 4.9 910 Max 182 1.126 TMJ 200 N340 5.3 961 Max 192 J-all 200 N340 5.4 978 Max 196 1.126 TMJ 200 N350 5.2 878 Start 176 TMJ 200 N350 5.2 892 Start 178 1.126 J-all 200 N350 5.3 884 Start 177 1.126 TMJ 200 N350 5.5 925 Max 185 1.126 TMJ 200 N350 5.9 974 Max 195 1.126 J-all 200 N350 6.0 991 Max 198 1.126 All Hdy 200 Power Pistol 4.6 700 Start 140 J-all 200 Power Pistol 5.8 880 Start 176 1.130 All Hdy 200 Power Pistol 6.0 900 Max 180 J-all 200 Power Pistol 6.3 960 Max 192 1.130 FMJ 200 Red Dot 3.7 Start 0 FMJ 200 Red Dot 4.1 890 Max 178 1.130 All Hdy 200 Silhouette 4.6 700 Start 140 HP-XTP 200 Silhouette 4.8 800 Start 160 1.135 J-all 200 Silhouette 4.8 805 Start 161 1.135 HdyHP 200 Silhouette 5.6 920 Max 184 1.135 All Hdy 200 Silhouette 6.0 850 Max 170 J-all 200 Solo 1000 3.7 825 Start 165 J-all 200 Solo 1000 4.1 898 Max 180 All Hdy 200 SR4756 4.8 700 Start 140 J-all 200 SR4756 5.0 824 Start 165 1.125 SpeerTMJ 200 SR4756 5.6 905 Max 181 J-all 200 SR4756 5.6 906 Max 181 1.125 All Hdy 200 SR4756 5.7 850 Max 170 SpeerTMJ 200 SR7625 5.2 885 Max 177 HP-XTP 200 TiteGroup 3.4 740 Start 148 1.125 Hdy HP-XTP 200 TiteGroup 3.4 744 Start 149 XTP 200 TiteGroup 3.8 822 Max 164 1.125 HdyHP-XTP 200 True Blue 5.4 802 Start 160 1.135 HdyHP-XTP 200 True Blue 6.0 891 Max 178 1.135 J-all 200 Unique 4.8 876 Start 175 1.130 FMJ 200 Unique 5.3 955 Max 191 1.130 HP-XTP 200 Universal 4.0 782 Start 156 1.125 Hdy HP-XTP 200 Universal 4.0 824 Start 165 Hdy HP-XTP 200 Universal 4.7 903 Max 181 1.125 J-all 200 WSF 4.9 814 Start 163 1.130 FMJ 200 WSF 4.9 840 Start 168 1.135 FMJ 200 WSF 5.7 930 Max 186 1.135 FMJ 200 WSL 3.8 760 Start 152 FMJ 200 WSL 4.4 850 Max 170 FMJ 200 WST 3.8 740 Start 148 1.135 FMJ 200 WST 4.5 810 Max 162 1.135 Edited October 20, 2016 by noylj Link to comment Share on other sites More sharing options...
noylj Posted October 20, 2016 Share Posted October 20, 2016 Here is some .40 S&W lead bullet data from various manuals: Bullet Weight Powder Weight Velocity Note P.F. COL Lead 200 231/HP38 3.0 669 Start 134 1.135 L-RN 200 231/HP38 3.0 700 Start 140 L-CFP 200 231/HP38 4.0 867 Start 173 Lead 200 231/HP38 4.0 850 Max 170 1.135 L-CFP 200 231/HP38 5.5 945 Max 189 Lead 200 AA2 3.6 694 Start 139 Lead 200 AA2 3.8 730 Max 146 L-FN 205 AA2 3.9 737 Start 151 L-FN 205 AA2 4.3 838 Max 172 1.110 L-FN 205 AA5 4.5 736 Start 151 L-CFP 200 AA5 4.6 878 Start 176 L-TC 200 AA5 4.7 823 Start 165 1.135 L-FN 205 AA5 5.0 836 Max 171 L-RN 205 AA5 5.0 836 Max 171 1.110 L-FP 200 AA5 5.0 841 Max 168 1.190 L-TC 200 AA5 5.2 907 Max 181 1.135 Lead 200 AA5 5.3 758 Start 152 L-CFP 200 AA5 5.3 990 Max 198 L-FP 200 AA5 5.3 886 Start 177 1.190 Lead 200 AA5 5.9 852 Max 170 L-FN 205 AA7 5.9 744 Start 153 L-C L-TC 200 AA7 6.1 777 Start 155 1.110 L-RN 205 AA7 6.6 845 Max 173 1.110 Lead 200 AA7 6.7 751 Start 150 L-C L-TC 200 AA7 6.8 883 Max 177 1.110 Lead 200 AA7 7.4 844 Max 169 L-FN 205 AA9 7.8 774 Start 159 L-C L-TC 200 AA9 7.8 774 Start 155 1.110 L-FN 205 AA9 8.7 880 Max 180 LC L-TC 200 AA9 8.7 880 Max 176 1.110 L-SWC 200 AP70N 4.1 880 Max 176 1.230 Lead 200 HS6 4.7 769 Start 154 1.100 L-RN 200 HS6 4.7 775 Start 155 L-RN 200 HS6 5.3 855 Max 171 Lead 200 HS6 5.3 855 Max 171 1.100 L-TC 200 HS6 5.5 835 Start 167 1.135 L-TC 200 HS6 5.6 842 Start 168 1.135 L-CFP 200 HS6 5.6 902 Start 180 L-TC 200 HS6 6.0 886 Max 177 1.135 L-TC 200 HS6 6.1 915 Max 183 1.135 L-FP 200 HS6 6.3 884 177 1.190 L-FP 200 HS6 6.7 940 188 1.190 L-CFP 200 HS6 6.9 996 Max 199 Lead 200 HS7 5.0 724 Start 145 1.135 L-RN 200 HS7 5.0 740 Start 148 L-RN 200 HS7 6.5 900 Max 180 Lead 200 HS7 6.5 900 Max 180 1.135 L-FP 200 N350 5.0 888 178 1.190 L-FP 200 N350 5.4 944 189 1.190 L-Conical 200 N350 5.9 1009 202 1.180 Lead 200 Silhouette 4.2 787 Start 157 1.135 L-RN 200 Silhouette 4.2 795 Start 159 Lead 200 Silhouette 4.9 900 Max 180 1.135 Lead 200 Solo 1000 3.7 825 Start 165 Lead 200 Solo 1000 4.1 898 Max 180 L-FP 200 TiteGroup 3.5 828 166 1.190 L-FP 200 TiteGroup 3.9 884 177 1.190 L-TC 200 Unique 4.2 825 Start 165 1.135 L-CFP 200 Unique 4.3 902 Start 180 L-TC 200 Unique 4.7 910 Max 182 1.135 L-CFP 200 Unique 5.3 953 Max 191 L-TC 200 Universal 3.9 832 Start 166 1.135 L-FP 200 Universal 4.2 860 172 1.190 L-TC 200 Universal 4.3 912 Max 182 1.135 L-FP 200 Universal 4.7 951 190 1.190 Lead 200 WSF 3.9 747 Start 149 1.135 L-RN 200 WSF 3.9 785 Start 157 Bear Creek 200 WSF 4.3 845 169 1.135 L-RN 200 WSF 4.5 0 L-CFP 200 WSF 4.7 909 Start 182 Bayou 200 WSF 4.7 Accurate 0 1.185 L-RN 200 WSF 5.0 920 Max 184 1.135 L-CFP 200 WSF 5.6 1043 Max 209 Lead 200 WSL 3.0 690 Start 138 1.135 L-RN 200 WSL 3.0 710 Start 142 Lead 200 WSL 3.9 860 Max 172 1.135 Lead 200 WST 3.5 760 Start 152 1.100 Lead 200 WST 3.5 760 Max 152 1.100-1.135 Link to comment Share on other sites More sharing options...
darkvibe Posted October 22, 2016 Share Posted October 22, 2016 200gr acme RN with 4.1gr WST at 1.180" makes 173 pf out of my edge. Link to comment Share on other sites More sharing options...
STORMINORMAN Posted October 22, 2016 Share Posted October 22, 2016 OUTSTANDING! Thanks, so much, for that info: basically corresponds to what I had imagined as starting loads for WIN 231, AutoComp & 800-X. Don't see much lead data for this weight in 40 S&W. p.s. Plated 200GR RNFP on sale (-5%) + FREE SHIPPING @ one of the "usual suspects", ends TODAY. Looks to be a good load for punching paper, IMHO. Thanks, again! Link to comment Share on other sites More sharing options...
jcc7x7 Posted October 22, 2016 Share Posted October 22, 2016 41 minutes ago, STORMINORMAN said: OUTSTANDING! Thanks, so much, for that info: basically corresponds to what I had imagined as starting loads for WIN 231, AutoComp & 800-X. Don't see much lead data for this weight in 40 S&W. p.s. Plated 200GR RNFP on sale (-5%) + FREE SHIPPING @ one of the "usual suspects", ends TODAY. Looks to be a good load for punching paper, IMHO. Thanks, again! Most all lead data, has been tranposed into lead with HiTek coating on it. I've been running 4.1-4.2 of WST with a 200 gr Bayou Hitek coated lead, 1.180 for years never has gone below 169 at chrono. Avgs. 171PF Link to comment Share on other sites More sharing options...
jrguar Posted October 26, 2016 Share Posted October 26, 2016 4.3 of AA2 behind a 200 grain hardcast out to 1.185. Burns clean pretty soft to shoot, probably want an 12-14 # recoil spring as well. keeps me around 169-172 consistantly. remember when working up loads in YOUR gun... your chrono is your second best friend.. right behind common sense Link to comment Share on other sites More sharing options...
jaep1911 Posted October 27, 2016 Share Posted October 27, 2016 ACME 200 grn bullet, N320 = 4.0 grn, 1.135", FED brass, Tanfo Elite Limited, PF=171 at Area 8. Link to comment Share on other sites More sharing options...
pskys2 Posted November 6, 2016 Share Posted November 6, 2016 (edited) Bayou 200 RN coated 1.210 3.6 clays 853 f/s. Edited November 6, 2016 by pskys2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now