PatrickDoyle Posted January 20, 2017 Share Posted January 20, 2017 I have the new Wilson commander model....4.25 inch barrel....smaller frame...great gun. Link to comment Share on other sites More sharing options...
Rideandshoot Posted January 22, 2017 Share Posted January 22, 2017 (edited) I have a Kimber 4" barrel 9mm Tactical Pro that I bought used and fixed up just for matches and practice. It has the full length frame and a mag well. I 'thinned out' the ambidextreous safety so that it makes the width requirement. At the 2015 Arizona State match it fit in the CCP box even with Tripp magazines. Has the CCP box changed since then? If the Kimber doesn't fit t I could shoot my EDC Wilson Compact with the shorter frame but would rather not. Edited January 22, 2017 by Rideandshoot Link to comment Share on other sites More sharing options...
Rideandshoot Posted January 22, 2017 Share Posted January 22, 2017 (edited) Wait now I see it. They changed the height for CCP to 5 3/8 from 6 right. Makes sense I guess. I'll have to run the Wilson Compact when I shoot sanctioned matches and Qualifiers. Edited January 22, 2017 by Rideandshoot left some off Link to comment Share on other sites More sharing options...
M1911 Posted January 26, 2017 Share Posted January 26, 2017 On 12/23/2016 at 3:45 PM, f2benny said: Fortunately every time his wife changes the rules he can accommodate us with new $4000 guns. See how that works out for everyone? Link to comment Share on other sites More sharing options...
RH45 Posted February 23, 2017 Share Posted February 23, 2017 When they first came out with CCP, I bought a mid-sized, M&P .45, and dropped in an Apex trigger kit. With minor loads, it's a LOT softer than 9mm. According to the way I measure it, I SHOULD have 1/16" of wiggle room. I shot an IDPA match last week, and asked if they got new boxes. They said they are getting new spacers. I'll have to see if it fits. Link to comment Share on other sites More sharing options...
robport Posted March 8, 2017 Share Posted March 8, 2017 A lot of us bought new guns for CCP and a lot became extinct with the new rule book. My SA Mod 2 4" is now too tall, by about 1/8". I think I can stuff it in the box with CZ-75 metal basepads, but I have to wait for our club to get the new inserts to try it. I'm certainly not risking a Sanctioned match with it right now. If it doesn't fit with the new basepads, I'll be selling this one. I'm certainly not buying any new guns for any new classes in IDPA from now on. I guess I can sell the upgraded trigger separately...maybe? Link to comment Share on other sites More sharing options...
Lnxgeek Posted March 8, 2017 Share Posted March 8, 2017 I was close to buying a Springfield Range Officer Champion 9mm last year, I would have been stuck with it now. Already have a full size 1911 in 9mm for ESP, so the Champion would not have been used in any matches. Link to comment Share on other sites More sharing options...
PatrickDoyle Posted April 5, 2017 Share Posted April 5, 2017 I really hope IDPA rethinks this......lots of cool little guns out there......industry would benefit from letting them in....CCP in IDPA would benefit from letting them in. Link to comment Share on other sites More sharing options...
PatrickDoyle Posted May 30, 2017 Share Posted May 30, 2017 So I have question for this thread.....CCP commander length grip....can you use full length mags (stick out little more) for USPSA SS matches? Link to comment Share on other sites More sharing options...
GMB Posted May 30, 2017 Share Posted May 30, 2017 Yes. Link to comment Share on other sites More sharing options...
RH45 Posted January 6, 2018 Share Posted January 6, 2018 On 2/23/2017 at 7:05 AM, RH45 said: When they first came out with CCP, I bought a mid-sized, M&P .45, and dropped in an Apex trigger kit. With minor loads, it's a LOT softer than 9mm. According to the way I measure it, I SHOULD have 1/16" of wiggle room. I shot an IDPA match last week, and asked if they got new boxes. They said they are getting new spacers. I'll have to see if it fits. I tried it in the new box, with spacers, and it's tight, for height, but, it goes in. As much as I prefer Les Baer, Wilson, or STI, I think the mid-size M&P is THE gamer gun. I was originally looking for an STI VIP for CCP, because the double stack mag reloads ok without a magwell, but, doing a slide lock reload, with an older M&P, the slide will auto forward. I know that some people have had issues with their M&Ps not stripping a round from the magazine, but, all of mine have been 100% Link to comment Share on other sites More sharing options...
IndyMichaelB Posted February 6, 2018 Share Posted February 6, 2018 (edited) On 12/29/2016 at 11:25 AM, SoonerPast said: Wilson Combat website lists: Overall Length: 7.85″ Good catch. Won't fit in 7.75" Do you think the latest new Rule Book edition has yet another error???? Been looking into this, and https://www.ammoland.com/2017/06/team-wilson-combat-wins-wisconsin-state-idpa-championship/ claims Greg Martin won CCP with a CQB Compact Commander. Would really like to hear from someone who has put one in the box before spending the cash. Edited February 6, 2018 by IndyMichaelB Link to comment Share on other sites More sharing options...
rowdyb Posted February 16, 2018 Share Posted February 16, 2018 And I've also seen them shooting the EDC X9 pistol as well. Now that is one sweet little gun. Link to comment Share on other sites More sharing options...
IndyMichaelB Posted February 16, 2018 Share Posted February 16, 2018 The EDC X9 is too big for CCP. Are you sure they were shooting CCP and not ESP? If CCP, do you know how they modified the pistol to fit? I would love to get a X9 to fit and use it in CCP. Link to comment Share on other sites More sharing options...
Bluemooncricket Posted February 19, 2018 Share Posted February 19, 2018 On 2/16/2018 at 6:57 PM, IndyMichaelB said: The EDC X9 is too big for CCP. Are you sure they were shooting CCP and not ESP? If CCP, do you know how they modified the pistol to fit? I would love to get a X9 to fit and use it in CCP. That makes two of us. I’m just about ready to purchase an EDC X9 for carry and would love to use it in CCP. However, my Springfield Range Officer Compact with magwell gets it done very nicely!!! Link to comment Share on other sites More sharing options...
rowdyb Posted February 25, 2018 Share Posted February 25, 2018 I was wrong about my previous gun and division comment. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now