misterzr Posted March 20, 2016 Share Posted March 20, 2016 Does anyone have some starting load data for 9MM Major using HS6 and 9mm 115gr FCP RN? Also including OAL for STI Trubor if possible Thanks Link to comment Share on other sites More sharing options...
superdude Posted March 20, 2016 Share Posted March 20, 2016 What does FCP mean? Link to comment Share on other sites More sharing options...
Open1215 Posted March 20, 2016 Share Posted March 20, 2016 https://youtu.be/8bFFFRaeIYM This is under a JHP. start much lower. My gun also has w 3/16in holes at 90* Sent from my LGLS991 using Tapatalk Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted March 20, 2016 Share Posted March 20, 2016 Run The Plunk Test, first, to determine a starting point for your OAL You'll probably PLUNK out at the 1.15 - 1.17" range (lots of people running at 1.165"). Then, start at 7.5 gr and work up slowly with a chrono. Good luck. Link to comment Share on other sites More sharing options...
AWLAZS Posted March 21, 2016 Share Posted March 21, 2016 I use 9.2 with 115 mg jhps at 1.165 Link to comment Share on other sites More sharing options...
kneelingatlas Posted March 21, 2016 Share Posted March 21, 2016 Is that Frontier Copper Plated? Are you running spacer mags? In my 5.1" CZ I got 172pf with an Xtreme plated RN at 1.158" over 8.8gr HS6, your STI will probably run a little slower. Link to comment Share on other sites More sharing options...
RGBSTI Posted March 21, 2016 Share Posted March 21, 2016 Iam running HS-6 At 9.0 grains under 115 Hap ,1.165 oal making 173.5 PF 5'' KKM barrel Akia stye comp with 4-.130 barrel holes Link to comment Share on other sites More sharing options...
open17 Posted March 21, 2016 Share Posted March 21, 2016 (edited) 8.8 HS-6 under a 115 Precision Delta JHP. 1.175 OAL, WSP primers. 5" KKM, two .156 barrel holes, Bedell comp. Chrono 174.5 at a match last week. Edited March 21, 2016 by open17 Link to comment Share on other sites More sharing options...
misterzr Posted March 21, 2016 Author Share Posted March 21, 2016 Thanks for the responses, think I have some starting info Link to comment Share on other sites More sharing options...
theWacoKid Posted March 24, 2016 Share Posted March 24, 2016 My recent lot of HS-6 only takes 8.5 gr under a 115 to make 173 pf. Montana Gold cmj's at 1.160". So start low and work up. Link to comment Share on other sites More sharing options...
dogtired Posted April 15, 2016 Share Posted April 15, 2016 I am right at 165 with 8.2gr HS-6 and 115 Xtreme heavy plated. Link to comment Share on other sites More sharing options...
cnote Posted April 15, 2016 Share Posted April 15, 2016 I am right at 165 with 8.2gr HS-6 and 115 Xtreme heavy plated. That's my major load with a 124 !!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now