Higgins Posted September 12, 2015 Share Posted September 12, 2015 Hello. I am looking at buying one and I was wondering if they will set off WSP primers reliably? Thanks, Higgins Link to comment Share on other sites More sharing options...
GrumpyOne Posted September 12, 2015 Share Posted September 12, 2015 Absolutely. No problems at all. Link to comment Share on other sites More sharing options...
MRevolutionIX Posted September 13, 2015 Share Posted September 13, 2015 No issues here. I have the CGW 11.5lb and reduced FP spring installed as well. Link to comment Share on other sites More sharing options...
lcs Posted September 13, 2015 Share Posted September 13, 2015 And CCI SRP Link to comment Share on other sites More sharing options...
Higgins Posted September 13, 2015 Author Share Posted September 13, 2015 I appreciate the replies! Link to comment Share on other sites More sharing options...
AlienAgenda Posted September 13, 2015 Share Posted September 13, 2015 Ran 1k wsp no issue. Running federal now. No issues. Sent from my SM-N910V using Tapatalk Link to comment Share on other sites More sharing options...
selecw Posted September 14, 2015 Share Posted September 14, 2015 (edited) The only primers I have had issues with have been Tula at very (sub 3lb) light trigger pull weights . Everything else seems to work. I have tried Federal, Federal Match, S&B, Winchester and Remington. Edited September 14, 2015 by selecw Link to comment Share on other sites More sharing options...
Snapcap Posted September 15, 2015 Share Posted September 15, 2015 (edited) I run CCI primers with 9mm. I have the CGW spring kit with extended FP. About every 25 rounds I have a light strike. Second pull of trigger and round fires. I have the lighter of the two hammer springs installed. I ordered 3000 federal SPP last night. Hope that makes a difference. Edited September 15, 2015 by Snapcap Link to comment Share on other sites More sharing options...
eerw Posted September 16, 2015 Share Posted September 16, 2015 I run CZC ext firing pin and 2075 FP spring. trigger is around 2#SA, 5.5DA has lit off everything I have shot. FED,WIN, CCI, S&B, other misc ammos and primers. Link to comment Share on other sites More sharing options...
Superpipe9 Posted September 17, 2015 Share Posted September 17, 2015 I run CZC ext firing pin and 2075 FP spring. trigger is around 2#SA, 5.5DA has lit off everything I have shot. FED,WIN, CCI, S&B, other misc ammos and primers. Stuart what hammer spring are you running? Link to comment Share on other sites More sharing options...
Reverendpdp Posted March 18, 2016 Share Posted March 18, 2016 Subscribed for the education... Link to comment Share on other sites More sharing options...
Smitty79 Posted March 18, 2016 Share Posted March 18, 2016 I have the 91030. When running the CZC extended FP, the 13# main spring and whatever FP spring that comes in the gun, I had 100% on everything. I ran Fed, SB, MT, Win, Rem and CCI. When I move to the 11.5# hammer spring, I had about 1% failure on everything but Fed and Win. Once I went to the CGW extended firing pin and RP firing pin spring, staying with the 11.5# hammer spring, I'm 100% on Fed, Rem and Win. SB and MT are less than 1% light strikes. But there are some. eerw, Stuart, reports that the CZC parts with a 2075 FP spring works with everything. That makes sense to me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now