bodene 5 Posted March 29, 2015 Share Posted March 29, 2015 I fellow wants to trade a gen. 4 27 for my gen4 30 anyone do the 40 to 9 thing with good results Link to comment Share on other sites More sharing options...
Kraj Posted March 29, 2015 Share Posted March 29, 2015 I run a 40 to 9 lone wolf barrel in my 35. Works fine after I had a gunsmith open it up a little Link to comment Share on other sites More sharing options...
Kraj Posted March 29, 2015 Share Posted March 29, 2015 I run a 40 to 9 lone wolf barrel in my 35. Works fine after I had a gunsmith open it up a little Link to comment Share on other sites More sharing options...
bodene 5 Posted March 30, 2015 Author Share Posted March 30, 2015 Rounds would not go into battery ? Link to comment Share on other sites More sharing options...
Kraj Posted March 30, 2015 Share Posted March 30, 2015 Correct. Link to comment Share on other sites More sharing options...
boudreux Posted March 31, 2015 Share Posted March 31, 2015 I've recently purchased a 40-9 for my Glock 35. I shot several hundred rounds through it yesterday with no problems Link to comment Share on other sites More sharing options...
Gmax9 Posted March 31, 2015 Share Posted March 31, 2015 (edited) I have a Glock 24 that I run a KKM 40 to 9mm conversion barrel in with no issues. I'd guess 1,500-2,000 rounds down the tube with no problems. Edited March 31, 2015 by Gmax9 Link to comment Share on other sites More sharing options...
bockerSV Posted March 31, 2015 Share Posted March 31, 2015 Have a storm lake conversion for my 23 and I have had zero issues with it, have run thousands of rounds through it. Link to comment Share on other sites More sharing options...
bodene 5 Posted April 1, 2015 Author Share Posted April 1, 2015 Thanks folks Link to comment Share on other sites More sharing options...
bodene 5 Posted April 1, 2015 Author Share Posted April 1, 2015 Thanks folks Link to comment Share on other sites More sharing options...
bountyhunter Posted April 1, 2015 Share Posted April 1, 2015 (edited) I ran the EFK Firedragon 40-9 conversion barrel in my G35. Works as advertised. They make a good barrel. Edited April 1, 2015 by bountyhunter Link to comment Share on other sites More sharing options...
asr1 Posted April 1, 2015 Share Posted April 1, 2015 I run LW 9mm in 35 Gen 4 no issue at all runs great since day one Link to comment Share on other sites More sharing options...
chalkdust21 Posted April 1, 2015 Share Posted April 1, 2015 I had a gen 4 G23 to G19 lone wolf with no issues. Link to comment Share on other sites More sharing options...
heaman Posted April 1, 2015 Share Posted April 1, 2015 Those of you running 40-9 barrels, are you using the 40 ejector or swapping to the 9? Link to comment Share on other sites More sharing options...
Mobetter Posted April 1, 2015 Share Posted April 1, 2015 I've got a LW 9mm conversion barrel in my Gen 2 31. With the stock ejector and extractor it worked fine, but kinda dribbled spent brass. I put a 9mm ejector and extractor on it and have a much more "positive" ejection... on spent brass. Under no circumstances will it eject unfired brass or dummy ammo with the mag removed. It'll kick 'em out just fine... Until LASC.... Then the round in the chamber just rattles down the mag well when I lock the slide to the rear. Link to comment Share on other sites More sharing options...
chalkdust21 Posted April 2, 2015 Share Posted April 2, 2015 Never had any issues with stock extractor, but if you want 100% reliability I would change it. I didn't change it because I went back and forth between 40 & 9. The 40 extractor works with 9 but not the other way around. Link to comment Share on other sites More sharing options...
mike4540 Posted April 5, 2015 Share Posted April 5, 2015 I am using a LW conv. barrel in my Gen 3 G35, no issues up to this point, stock extractor. Link to comment Share on other sites More sharing options...
ichetucknee Posted April 6, 2015 Share Posted April 6, 2015 I am using a LW conv. barrel in my Gen 3 G35, no issues up to this point, stock extractor. Same here. No problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now