CyclicRate Posted April 4, 2015 Author Share Posted April 4, 2015 Let us know how it works out! Link to comment Share on other sites More sharing options...
Marv Z Posted April 5, 2015 Share Posted April 5, 2015 I'm using a 9 lb spring with the stock guide rod and it works fine. The original 1911's didn't have a guide rod, just a short guide. Link to comment Share on other sites More sharing options...
telecat Posted April 5, 2015 Share Posted April 5, 2015 (edited) Double tap !! Edited April 5, 2015 by telecat Link to comment Share on other sites More sharing options...
telecat Posted April 5, 2015 Share Posted April 5, 2015 A buffer will help too. You could try a 10,11 & 12 with a buffer to see which feels the best. From the factory the gun is way over sprung IMHO... Let us know how it runs/feels.. Link to comment Share on other sites More sharing options...
rtl Posted April 5, 2015 Share Posted April 5, 2015 I will, thanks again everyone. Might be a couple weeks before I can get the parts and shoot it again. I really appreciate all the help. Thanks Link to comment Share on other sites More sharing options...
CyclicRate Posted April 12, 2015 Author Share Posted April 12, 2015 I finally had some time to try out the 11lb recoil spring with the Wilson full length guide rod. It ran great and very flat with a mix of factory ammo. Link to comment Share on other sites More sharing options...
kian2006 Posted April 24, 2015 Share Posted April 24, 2015 Cyclic rate sent u a pm Link to comment Share on other sites More sharing options...
rtl Posted April 25, 2015 Share Posted April 25, 2015 I finally had some time to try out the 11lb recoil spring with the Wilson full length guide rod. It ran great and very flat with a mix of factory ammo. That's good news - thanks Link to comment Share on other sites More sharing options...
CyclicRate Posted April 25, 2015 Author Share Posted April 25, 2015 Replied Kian. You may get a more detailed response if you ask here though. Link to comment Share on other sites More sharing options...
rangerguy Posted July 9, 2015 Share Posted July 9, 2015 (edited) Anyone have a problem removing the firing pin stop? Mine would not come out nor go back in easy? Yes I pushed the firing pin in.,, Edited July 9, 2015 by rangerguy Link to comment Share on other sites More sharing options...
PieEye Posted July 9, 2015 Share Posted July 9, 2015 Anyone have a problem removing the firing pin stop? Mine would not come out nor go back in easy? Yes I pushed the firing pin in.,, Yup, mine was the same way..... Link to comment Share on other sites More sharing options...
rangerguy Posted July 9, 2015 Share Posted July 9, 2015 Was? Did you do something to fix it? Link to comment Share on other sites More sharing options...
PieEye Posted July 9, 2015 Share Posted July 9, 2015 I guess i should have said "is". I had to "tap" it out and then "tap" it back in the only time I've had it out. Link to comment Share on other sites More sharing options...
rangerguy Posted July 9, 2015 Share Posted July 9, 2015 Mine took very heavy "tapping" Link to comment Share on other sites More sharing options...
JBhunter45 Posted July 14, 2015 Share Posted July 14, 2015 stoned it and re-blued so it fits how it is supposed to Link to comment Share on other sites More sharing options...
joeg Posted March 28, 2016 Share Posted March 28, 2016 I know this is an old thread but maybe someone can give me a correct answer. does any know the mainspring weight for a para pro custom p18.9? Link to comment Share on other sites More sharing options...
fishpinoy27 Posted March 28, 2016 Share Posted March 28, 2016 17 would be fine Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now