Steamman Posted August 2, 2011 Share Posted August 2, 2011 (edited) Does anyone have an easy way to clean a comp ? Do those ultrasonic cleaners work ? Any ideas will help thanks. Edited August 2, 2011 by Steamman Link to comment Share on other sites More sharing options...
Sean Gaines Posted August 2, 2011 Share Posted August 2, 2011 Does anyone have an easy way to clean a comp ? Do those ultrasonic cleaners work ? Any ideas will help thanks. I have tried every chemical in my garage, trying to find the magic solution to desolve the plaque that builds up. No luck! It really comes down to picking it out, with a dental pick or something that can get under the ledge of the carbon. I feel like a dentist, when I clean my comp. you can try taking some solvent and letting it soak for a while than start picking, but there is no magic solvent, that will desolve the stuff. When soaking be careful of getting the solvent where the barrel meets the compensator, if your compensator is threaded in, than the solvent could deteriate the loctite, and then you will have a loose compensator, once you fire a few rounds. Link to comment Share on other sites More sharing options...
Toolguy Posted August 2, 2011 Share Posted August 2, 2011 (edited) There are lots of threads on this subject. My solution is to soak the comp in a 50-50 mix of hydrogen peroxide and vinegar for about 45 minutes. This dissolves the lead and it falls out into the bottom of the container. Then rinse well with hot water to end any more chemical reaction. Oil the comp. Spray ports of comp with Dillon case lube before shooting and about every 100 rounds to prevent future buildup of carbon and lead. Edited August 2, 2011 by Toolguy Link to comment Share on other sites More sharing options...
ChuckS Posted August 2, 2011 Share Posted August 2, 2011 (edited) Hi there, This post should probably be in the Open Pistol forum, like these: http://www.brianenos.com/forums/index.php?showtopic=106910&view=findpost&p=1215938 http://www.brianenos.com/forums/index.php?showtopic=11500&view=findpost&p=132577 The search function is your friend Later, Chuck ETA: Oh yeah, welcome to the forum! Edited August 2, 2011 by ChuckS Link to comment Share on other sites More sharing options...
J-Ho Posted August 2, 2011 Share Posted August 2, 2011 I've had pretty good luck with carb cleaner. Not the spray but the kind you soak carb parts in. I drop I'm my comp and let it soak overnight. Didn't disolve stuff but it loosens it up quite a bit. Carbon buildup comes off very easy after that Link to comment Share on other sites More sharing options...
Steamman Posted August 2, 2011 Author Share Posted August 2, 2011 Thank you to all I will try them all and decide which one works Link to comment Share on other sites More sharing options...
wksinatl Posted August 4, 2011 Share Posted August 4, 2011 I pretty much do exactly like Toolguy does. That crud is some stubborn stuff but this method seems to work OK without messing up the finish. Keith Link to comment Share on other sites More sharing options...
Aircooled6racer Posted August 4, 2011 Share Posted August 4, 2011 Hello: The comp on my Bully barrel is aluminum so I am not sure about using a caustic to remove the lead buildup. G-Man Bart told me to use a drill bit to clean out the comp since that is what he does. I have no buildup yet so I have not had to do this. Thanks, Eric Link to comment Share on other sites More sharing options...
DWFAN Posted August 4, 2011 Share Posted August 4, 2011 Hello: The comp on my Bully barrel is aluminum so I am not sure about using a caustic to remove the lead buildup. G-Man Bart told me to use a drill bit to clean out the comp since that is what he does. I have no buildup yet so I have not had to do this. Thanks, Eric I used the parasitic acid on my aluminum bianchi comp. It didnt really eat the metal, but it did stain it like it was about to eat through it. I use a dremel with a fine conical/round stone to get the hard carbon build up off. It wont damage the aluminum as long as you are gentle and pay attention. Link to comment Share on other sites More sharing options...
Action Pistolero Posted August 5, 2011 Share Posted August 5, 2011 A small engine turning brush on the end of a dremel and some solvent works well. No worries about removing aluminum. Anything that scratches the metal just gives the carbon more of a surface to stick too. Link to comment Share on other sites More sharing options...
DWFAN Posted August 5, 2011 Share Posted August 5, 2011 A small engine turning brush on the end of a dremel and some solvent works well. No worries about removing aluminum. Anything that scratches the metal just gives the carbon more of a surface to stick too. Yep, and now, after using Dillon Case lube every 100rds, my comp is carbon free after over 1k rounds. Link to comment Share on other sites More sharing options...
Sean Gaines Posted August 5, 2011 Share Posted August 5, 2011 A small engine turning brush on the end of a dremel and some solvent works well. No worries about removing aluminum. Anything that scratches the metal just gives the carbon more of a surface to stick too. Yep, and now, after using Dillon Case lube every 100rds, my comp is carbon free after over 1k rounds. I never thought of that, so you are using the case lube as a preventative maintenance once you have cleaned the comp. I have heard of spraying WD 40, but once you fire that first round your cmore just gets oil all over it, but it keeps it from cruding up so easily. I wonder if Hornady One shot would work also. Link to comment Share on other sites More sharing options...
DWFAN Posted August 5, 2011 Share Posted August 5, 2011 A small engine turning brush on the end of a dremel and some solvent works well. No worries about removing aluminum. Anything that scratches the metal just gives the carbon more of a surface to stick too. Yep, and now, after using Dillon Case lube every 100rds, my comp is carbon free after over 1k rounds. I never thought of that, so you are using the case lube as a preventative maintenance once you have cleaned the comp. I have heard of spraying WD 40, but once you fire that first round your cmore just gets oil all over it, but it keeps it from cruding up so easily. I wonder if Hornady One shot would work also. Yes, actually.. once I replaced the old comp, I soaked the new one in oil for 2 days. Then cleaned it out, and sprayed case lube on the comp, let it dry and then repeated a few more times before shooting it. Now, its just routine. Get gun out of case, spray the comp. Shoot a stage, spray the comp. Packing up to go home, spray the comp. No thick hard carbon build up anymore. This is an AL comp also. The guys I shoot with who have steel ones stay even cleaner and shiny. I havent thought of Hornady One Shot, I think Dillon is darn close to as good as it gets. The alcohol evaporates (unlike WD40), and the lanolin coats the aluminum and doesnt give the carbon a place to stick to. I get a small amount of splatter on the Aimpoint, but the comp is on the end of a 6 inch barrel, so its probably farther away than a typical open gun with cmore. Link to comment Share on other sites More sharing options...
Alan550 Posted August 5, 2011 Share Posted August 5, 2011 Hornady One Shot isn't as effective as Dillon or one of the others that uses lanolin & alcohol. Frankfort Arsenal & MidSouth Shooter's Supply are a couple that work as good, but the One Shot isn't the same formulation. DW is right about spraying between stages and just before you go home. Believe it or not, I'm the one who came up with this idea originally. I'd seen other shooters use oil in there, but it got blasted out after the first few shots & was only mildly effective. The lanolin in the case lube keeps the fouling soft until you get the time to use cotton swabs & bore cleaner on it, even days later! Final cleaning involves cutting Scotch-Brite into small strips, holding that with a hemostat or needle holder that you can get at gun shows or online. Dip that into your bore cleaner, whatever brand you use, and scrub out the last of the tough stuff that might form in the comp. For me, using Shooter's Choice Bore Cleaner, it's about a 5 minute operation to get it back to pristine as the day it was made. I know that most things that sound too good to be true are just that, but this stuff WORKS! Alan~^~ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now