jmorris Posted September 12, 2010 Share Posted September 12, 2010 Some of you may have seen the brass sorter that I have built before but I ran across this one on another forum. It is pretty good for what many need and I don’t see how they can make any money at the $300 price (there was a coupon). At that price it might bridge the gap between the Camdex, Scharch and the shell sorter. I don’t have anything to do with them but I do like gizmos and I couldn’t get my steel version of what they have to work, so hats off to the thinking man. http://www.ultimatesorter.com/ Here is a video Link to comment Share on other sites More sharing options...
wide45 Posted September 12, 2010 Share Posted September 12, 2010 I have my doubts it's the ultimate, but it could well be better the the 10 finger system. Link to comment Share on other sites More sharing options...
yoshidaex Posted September 12, 2010 Share Posted September 12, 2010 in the video you posted, the machine with the 2 steel rollers looks to be running fine. what was it that you couldn't get to work right? Link to comment Share on other sites More sharing options...
jmorris Posted September 12, 2010 Author Share Posted September 12, 2010 I have my doubts it's the ultimate, but it could well be better the the 10 finger system. I will agree with that but when it cost less complete, than just one motor I used on mine does new and it does the work I was impressed. Hell, I have to give the designer a pat on the back to make a design I couldn’t get to work, work. Link to comment Share on other sites More sharing options...
Merlin Orr Posted September 12, 2010 Share Posted September 12, 2010 Looks like a step in the right direction for sure. Still some hand work to be done but if you do large amounts it would be a time saver over what most of us have to work with. I am really tempted. Link to comment Share on other sites More sharing options...
jmorris Posted September 12, 2010 Author Share Posted September 12, 2010 (edited) in the video you posted, the machine with the 2 steel rollers looks to be running fine. what was it that you couldn't get to work right? The one I built runs fine and classifies better but I couldnt produce them for less than 10 times what they charge for that one. Edited September 12, 2010 by jmorris Link to comment Share on other sites More sharing options...
jrb06 Posted September 12, 2010 Share Posted September 12, 2010 If you look at thr web site it shows three bins so you still have to sort the 40/38/357 brass and the 44/45 brass. Neat system but still requires you to sort by hand. Link to comment Share on other sites More sharing options...
CenTX Posted September 12, 2010 Share Posted September 12, 2010 If you look at thr web site it shows three bins so you still have to sort the 40/38/357 brass and the 44/45 brass. Neat system but still requires you to sort by hand. You will also have 38 super, Super Comp and 380 to be hand sorted out. Link to comment Share on other sites More sharing options...
Maksim Posted September 14, 2010 Share Posted September 14, 2010 I couldn't finish watching the video. Are they all that loud? Link to comment Share on other sites More sharing options...
Chills1994 Posted September 14, 2010 Share Posted September 14, 2010 jmorris wrote: The one I built runs fine and classifies better but I couldn’t produce them for less than 10 times what they charge for that one. Could a guy cobble something up with a Dillon casefeeder/hopper and then two diverging counter-rotating inclined rollers? Or does the Dillon casefeeder NOT have enough gumption for that? Link to comment Share on other sites More sharing options...
Canuck223 Posted September 14, 2010 Share Posted September 14, 2010 I can get a whole 5 gallon pail sorted for a pack of Pokemon cards, and during the process, the slave labour is in the basement, not pestering me for the TV remote. Link to comment Share on other sites More sharing options...
Chris Keen Posted September 15, 2010 Share Posted September 15, 2010 I couldn't finish watching the video. Are they all that loud? Not if you turn the volume on your speakers down. Link to comment Share on other sites More sharing options...
jmorris Posted September 15, 2010 Author Share Posted September 15, 2010 Could a guy cobble something up with a Dillon casefeeder/hopper and then two diverging counter-rotating inclined rollers?Or does the Dillon casefeeder NOT have enough gumption for that? We covered that pretty well here a few years ago. http://www.brianenos.com/forums/index.php?showtopic=11364&st=25 Link to comment Share on other sites More sharing options...
Sorter Guy Posted September 16, 2010 Share Posted September 16, 2010 Hi, I am the designer of the sorter discussed here and found this post from all the referrals coming to my site. I appreciate everyone looking and all of the comments. The most common concern seems to be about limited sorting. The design allows changing of the sorter tray to perform a secondary sort. I am working on trays for separating the 380s from the 9MM and another for the 40s and 38/357s. It will be a simple process to change the tray after the initial sort and resort the appropriate bin. I hope to have the 380/9MM tray ready within the next week with the 40/38 soon after. All of the brass I pickup has very little big stuff (44/50/500) so I never really thought much about it. I will definitely put that on the to-do list. The 38 Super might be the biggest problem for this type of sorting, but I will look into it. Please keep in mind this unit was designed primarily for the non-commercial reloader. After accuracy and speed, size and price were important concerns. It will never compare to the $5,000.00+++ Scharch or Camdex and was not meant to. In the basic configuration, it will do the bulk of the tedious part of the work. I also recently added some accuracy test data to the site. As to the noise... Yes vibration is fairly loud but not like at the range . Ear plugs are not a bad idea while operating. I welcome all constructive criticism. I would also like to offer a discount to forum members. Just enter BEF9 at checkout for a $20.00 discount. (Sorry for the long response.) Thanks again, Jeff Link to comment Share on other sites More sharing options...
jmorris Posted September 16, 2010 Author Share Posted September 16, 2010 Swapping the trays out is a good idea, you could make it’s effective length longer while still keeping it compact. The diameters are different enough to sort, 380 is .374, 9X19 is .394 and 38 super is .406, if the machining is precise enough. What I did on the roller one in the link above was simply watch where the case fell and then inserted a divider. Not only will it sort 380 out but it will even sort 9X18 from 9X19. Link to comment Share on other sites More sharing options...
raz-0 Posted September 16, 2010 Share Posted September 16, 2010 But does it work $300 better than the slotted plastic bins? Doesn't look like you pick up much speed or can leave it unattended. Link to comment Share on other sites More sharing options...
steelplates1 Posted September 28, 2010 Share Posted September 28, 2010 Thank God someone has developed a affordable sorter,,,now it wont take hours shaking sifters,,, I can spend more time reloading!!!! Link to comment Share on other sites More sharing options...
steelplates1 Posted September 28, 2010 Share Posted September 28, 2010 Anything has to work better than sitting with 5 gallon buckets and slotted sorters Link to comment Share on other sites More sharing options...
jmorris Posted September 29, 2010 Author Share Posted September 29, 2010 Thank God someone has developed a affordable sorter,,,now it wont take hours shaking sifters,,, I can spend more time reloading!!!! Anything has to work better than sitting with 5 gallon buckets and slotted sorters 5 posts yesterday, none more than a sentence long except the thread you started about a hypothetical problem. If you need to sell something in the classifies just let me know. Link to comment Share on other sites More sharing options...
DougCarden Posted November 13, 2010 Share Posted November 13, 2010 I bought one, and did 9 5 gallon buckets yesterday. It works as advertised, and saved me hours. I started putting it together at 930am and was done sorting brass by 3pm. Some of the best money I have spent on this type of equipment! DougC Link to comment Share on other sites More sharing options...
felker14 Posted December 3, 2014 Share Posted December 3, 2014 I bought one, and did 9 5 gallon buckets yesterday. It works as advertised, and saved me hours. I started putting it together at 930am and was done sorting brass by 3pm. Some of the best money I have spent on this type of equipment! DougC How did this sorter work out in the long run? Thanks Link to comment Share on other sites More sharing options...
mlmiller1 Posted December 3, 2014 Share Posted December 3, 2014 I bought one & it works nice. Saves eye strain but is loud. I just wear ear plugs. Its a long story but lets say it does a good job especiallu for the price. I no longer need to size large volumes so it may actually be for sale soon. Link to comment Share on other sites More sharing options...
Brassaholic13 Posted December 3, 2014 Share Posted December 3, 2014 How does it separate shells that get stuck together? I've seen .45 ACP, .40 S&W, and 9mm all trying to mate up and make a new caliber. Link to comment Share on other sites More sharing options...
peterthefish Posted December 3, 2014 Share Posted December 3, 2014 Man looks like the price has gone up a bit from $300 though! Link to comment Share on other sites More sharing options...
Sorter Guy Posted December 3, 2014 Share Posted December 3, 2014 Thanks again for all the positive comments and reviews. Stuck/nested cases are always a problem and while the vibration helps slightly, I don't think there is any cost effective machine method to separate them. The machine has gone through a lot of upgrades in the last 4 years and is much more durable and now rated for continuous duty. We have many customers running these machine 8 hours a day all year with no issues. We also have customers that have run them 24 hours a day for months. Jeff The Ultimate Sorter Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now