Search the Community
Showing results for tags 'suppressor'.
-
Hey guys, I have an urban grey p-01 with CGW short reset, i have a huge issue where upon attaching suppressor (rugged obsidian) my short reset becomes a binary trigger that shoots 2 rapid fire shots after i release finger from trigger i get a weird interaction where the short reset gets completely erased to the point i dont feel the reset click...I am not "riding" the trigger because this issue doesn't exist without suppressor or my other guns that i run suppressed. Additionally, my trigger becomes dead because the decocker slightly pops out of the frame. I am very concerned about these issues because this used to be my nightstand setup and i would like to keep it this way, but if i cant i may be forced to bring my gun back to stock everything. Stock recoil spring, CGW short reset package (extended firing pin, hammer spring, firing pin spring) gun is cleaned often, full detail cleaning every 1000 rounds suppressor is cleaned every 2000 rounds booster and booster spring are lightly lubed up with white lithium (per manufacturer suggestion) blast cap is fully screwed in Thanks in advance for any attempts to help!
-
My brake is effective, but also quite noisy, and there's also the concussion. Of course I wear both plugs and muffs, but after a long day on the range I get a starting headache. Have anyone tried a CRD device on a .223 IPSC/3-Gun rifle? Does it increase the recoil notably, and do the reduced concussion make it more comfortable to shoot? I've thought about getting a steel suppressor, which would help with both the noise and concussion, but I assume that would lead to huge mirage and insanely accelerated barrel wear near the crown..? Thanks!
- 10 replies
-
- crd
- concussion reduction device
-
(and 2 more)
Tagged with:
-
I'm here looking for answers on a very specific question. My question for anyone who has experience with Vihtavuori Tin Star is, does it burns clean and is ok to use in sealed suppressors? I am interested in using it in to develop a subsonic load for my 45 Raptor Rem 700 SBR, pushing custom made 500gn .452 bullets from Outlaw State. Tin Star was the powder recommended by Arne Brennan, the guy who developed 45 Raptor, as it's quite bulky and will give a good charge density and it'll get a full burn in my 12" barrel. The suppressor I'm going to be using is a Crux ARC, which is an all titanium sealed rifle can. If I was using a user serviceable can, I wouldn't be concerned, but obviously with a sealed unit I want to make sure it's not going to get fouled up by using pistol powders in a rifle can. Tin Stars intended used is for cowboy action shooting, which doesn't really mandate a clean burning powder; VV claims it's a clean burning powder, but "clean burning" is subjective. I have seen on other threads that some guys are using Tin Star for subsonic 300blk loads; which I would assume implies use with a suppressor (because otherwise what's the point?) but that's not always the case. If I'm going to buy Tin Star, I'd also be interested in using it for 300blk reloads (if it can generate enough pressure to cycle the action on an AR) which also goes through a sealed can, a SilencerCo Omega.If you know any other good powders worth considering for this specific application, let me know.
- 1 reply
-
- vihtavuori
- tin star
-
(and 3 more)
Tagged with:
-
I just picked up a used Gen 4 Glock 34 MOS that I'll mostly be using at the informal multi-gun competitions / shoots locally. I plan on running an RMR on it and likely swapping the sights out with suppressor height sights for cowitnessing. Who makes a holster that would work (clear the RMR, sight channel large enough for the suppressor sights, good enough retention for running and gunning, and preferably dropped / offset)?
-
Question: What is y'alls experience mounting SF brakes and suppressors on JP rifles? Have a CTR02 with an 18'' 6.5 upper and a 22'' .223 upper; both have adjustable blocks. Did you have the brake timed or just use peel washers? Currently, both are wearing blended JP large profile tac comps. Also, in going from suppressed to not, are you simply tuning the block each time or running it as is? Have a new SOCOM due in soon and just want to start getting prepared for best practices and what not. Thanks