Search the Community
Showing results for tags 'media'.
-
Have a couple bras cleaning questions: 1. Does the cleaning media and color matter? 2. Can I use a large rock tumbler or is a vibrating cleaner needed? 3. De-prime prior to cleaning or after? Thank you.
-
Hello all, I'm in the development stages of setting up a humongous brass tumbler A LA 4 CuFt Kobalt concrete mixer from Lowes. I ran my first batch tonight, approx 6000 9mm cases. Clean as a whistle in just two hours with 30lbs of SSM, 2TBSP dish soap and 3 gallons of water. I ran into two problems with the overall process I would consider 'Major'. First: Media separation. It needs to be done underwater in order to remove the media from the brass. I found that a simple 32oz cup to scoop the brass into the media separator took forever, especially once 75% of the brass was out of the mixer and into the containment device leaving mostly media to contend with while trying to find the remainder of the brass. Possible solution: I guarantee I'll need a humongous funnel and possibly a test sieve. Empty mixer into sieve, strain media and repeat using clean water in the mixer. Second: Drying. I currently have the brass sitting on a towel on the vasement floor with a heat buster fan circulating lots more air than necessary, along with a dehumidifier to keep the humidity level @ 40%. Possible solution: self-stacking wire totes or oven racks placed directly in front of a large fan or in the oven. I am afraid I just embarked on a 'learning experience', but If I can figure out how to make at least one of the two steps above work reasonably well I will be able to do an entire years worth of brass cleaning in mere hours with extremely consistent results. What say you, volume shooters? Steve