Search the Community
Showing results for tags 'ar15'.
Found 18 results
-
Hey all, 3 gun season here is Colorado will be over in a couple of months and i'm already thinking about off-season stuff. Looking to replace my primary AR as its getting a little tired. Was thinking it would be nice to know what guys (and girls) would build if they were going down that road. I know I could just buy a completed rifle from a quality company (but wheres the fun in that). So, if you're game, post your dream build. Would like to know all the components (receivers, barrels, triggers, etc), basically everything. Also, if you feel up to it, an explanation on why you would use what you listed would be cool. Looking forward to seeing the info. Thanks
-
Has anyone been successful in making a ar15 gas gun work as a 9mm? What are the problems? Not enough gas?
-
Registration will be opening this week (Thursday 7pm Central) for the 2017 ICON Carbine Match in Denver Co on June 2-4. This is going to be a match you don't want to miss. -2 day match (7 stages per day) -Rifle Caliber or Pistol Caliber Carbine -13/14 stages (depending on if a sponsor comes through) -400-ish round count -High Round Count stages -Cash Prizes in each Division and High Overall I have invited some of the countries best shooters to duke it out for the High Overall Cash Prize. REGISTRATION LINK BELOW: Cost is $230 (includes lunch) https://practiscore.com/icon-carbine-series/register I WOULD ALSO LIKE TO DEDICATE ONE OF THE STAGES TO THE LAW ENFORCEMENT COMMUNITY, PARTICULARLY THE DENVER POLICE DEPARTMENT. You guys risk your lives to protect and serve the community and we would like to repay the favor. If you have any questions or concerns please don't hesitate to contact me. I hope to see you all there. -
Registration will be opening this week (Thursday 7pm Central) for the 2017 ICON Carbine Match in Denver Co on June 2-4. This is going to be a match you don't want to miss. -2 day match (7 stages per day) -Rifle Caliber or Pistol Caliber Carbine -13/14 stages (depending on if a sponsor comes through) -400-ish round count -High Round Count stages -Cash Prizes in each Division and High Overall I have invited some of the countries best shooters to duke it out for the High Overall Cash Prize. REGISTRATION LINK BELOW: Cost is $230 (includes lunch) https://practiscore.com/icon-carbine-series/register I WOULD ALSO LIKE TO DEDICATE ONE OF THE STAGES TO THE LAW ENFORCEMENT COMMUNITY, PARTICULARLY THE DENVER POLICE DEPARTMENT. You guys risk your lives to protect and serve the community and we would like to repay the favor. If you have any questions or concerns please don't hesitate to contact me. I hope to see you all there.
-
Registration will be opening this week (Thursday 7pm Central) for the 2017 ICON Carbine Match in Denver Co on June 2-4. This is going to be a match you don't want to miss. -2 day match (7 stages per day) -Rifle Caliber or Pistol Caliber Carbine -13/14 stages (depending on if a sponsor comes through) -400-ish round count -High Round Count stages -Cash Prizes in each Division and High Overall I have invited some of the countries best shooters to duke it out for the High Overall Cash Prize. REGISTRATION LINK BELOW: Cost is $230 (includes lunch) https://practiscore.com/icon-carbine-series/register I WOULD ALSO LIKE TO DEDICATE ONE OF THE STAGES TO THE LAW ENFORCEMENT COMMUNITY, PARTICULARLY THE DENVER POLICE DEPARTMENT. You guys risk your lives to protect and serve the community and we would like to repay the favor. If you have any questions or concerns please don't hesitate to contact me. I hope to see you all there.
-
Registration will be opening this week (Thursday 7pm Central) for the 2017 ICON Carbine Match in Denver Co on June 2-4. This is going to be a match you don't want to miss. -2 day match (7 stages per day) -Rifle Caliber or Pistol Caliber Carbine -13/14 stages (depending on if a sponsor comes through) -400-ish round count -High Round Count stages -Cash Prizes in each Division and High Overall I have invited some of the countries best shooters to duke it out for the High Overall Cash Prize. REGISTRATION LINK BELOW: Cost is $230 (includes lunch https://practiscore.com/icon-carbine-series/register I WOULD ALSO LIKE TO DEDICATE ONE OF THE STAGES TO THE LAW ENFORCEMENT COMMUNITY, PARTICULARLY THE DENVER POLICE DEPARTMENT. You guys risk your lives to protect and serve the community and we would like to repay the favor. If you have any questions or concerns please don't hesitate to contact me. I hope to see you all there.
-
Had a local match this last weekend, finished 7th out of 25, looking to shave a few more seconds. anyone see something to comment on?
-
This coming Saturday, September 6th is the next regularly scheduled RIFLE match for the club. With the usual 5 stages including a LONG RANGE STAGE. The match starts at 3PM. This match contains 3-gun style rifle only stages. Please Pre-Register at the link listed here. https://clubs.practiscore.com/september-2014-rifle-match-phoenix-rod-and-gun-club/register Pre-Registering is very helpful as is saves me allot of time and helps me to plan for how to best run the match. The continued success of these matches depend on your cooperation with these requests. This month will begin set-up for the match after Thursday night steel is finished around 8pm. In appreciation for your assistance, you can shoot the match for free in addition to cash for gas/lunch. Please email me if you can help. -
18" barrel, rifle gas, .223 Wylde chambering, 1:8 twist, no more than 2 pounds. I have found some near misses, but nothing that hits all the specs. The Spike's Lothar-Walther barrels are all of the above, except mid-length gas. The VooDoo barrels are close, but they are 1:7 twist and don't do Wylde. The Rainier SPR barrels have all the specs but are over 2.5 pounds. Am I looking for a unicorn?
-
This coming Saturday, June 7th is the next regularly scheduled USPSA match for the club. With the usual 4 stages including a classifier. The match starts at 7AM. Please Pre-Register at the link listed here. https://clubs.practiscore.com/june-uspsa-match-phoenix-rod-and-gun-club/register Afterwards, we will again hold the Rifle match starting at 3pm after we change the stages up a bit. This match contains 3-gun style rifle only stages. Now that it is getting hotter outside, please also indicate your preference regarding the start time. Since 3pm is usually the hottest time of the day, we might want to start a little later in the summer. Please let me know what you think. Please also pre-register for that match on this different link: https://clubs.practiscore.com/june-rifle-match-phoenix-rod-and-gun-club/register Pre-Registering is very helpful as is saves me allot of time and helps me to plan for how to best run the match. The continued success of these matches depend on your cooperation with these requests. Due to the heat - This month we will begin set-up for the match on Thursday Night around 8:30 pm. I will also spend the entire day Friday there making sure that the match is ready for you on Saturday. Any and all help is appreciated at any time that is convenient for you. In addition you can shoot the match for free in addition to cash for gas/lunch. Please email me if you can help. azuspsa@gmail.com
-
Hey guys Im looking for a little feed back on some stages I drew up for a Rifle only match I'm putting on at our club. This is my first time being a MD and designing stages, so I'm sure there are some subtleties that I'm missing. http://s948.photobucket.com/user/jacketjoed/library/rifle%20stages -
I am building an AR for 3 gun. My heart wants to go all out, but my wallet wants to save some money where I can. What should I splurge on and what can I save a little on. For example Billet vs Forged receivers, quality of barrels, trigger, etc. I was thinking 18" barrel, but may go with 16".
-
How accurate is accurate enough for a 3-Gun Rifle?
PrestonJMoore posted a topic in Rifle - Technical
So, for those of you that shoot 3-Gun matches with shots out to 300-400 yards , how accurate are your rifles/loads or what would you consider acceptable accuracy? 0.5MOA, 1 MOA, 2 MOA, 3+ -
I just built my first AR and I am having a small problem, hope someone can point me in the right direction. The rifle functions correctly when manually cycled. When fired, the rifle cycles but the trigger is frozen. -- the bolt cycles, the case is ejected, a new round fed Manually cycle and things are fine. Remington ammo AIM Surplus lower, CMMG parts kit, Colt 20" upper, Colt stock and buffer My assumption is that the hammer is not locking back in the cocked position. But that is only an assumption.
-
What are the merits of each of these options and which one do you feel wins? I've read that the A2 front sight post is the more "reliable" option. I've also read that if your barrel does not have the correct dimples then you don't have the "low profile gas block under free float handguard" option.
-
Hello, Does anyone have a complete step by step guide for doing this? Pictures would be a plus. I saw some stuff on youtube but would prefer to be recommended to a specific one. I have a new upper, brake on the way but I need to pin and weld it, not wanting to go NFA SBR way. Thanks,
-
Is the majority of the difference between a 16", 18" and 20" barrel the weight and distance shots, or is there something more that I should consider for my 3g build?
-
I'm building a 3Gun rifle from parts. I've used all the collective knowledge of this forum to put together the parts list for the build. My goal was to have the lightest, softest shooting rifle for approximately $1,500. The parts list below came at $1,600. The following parts list, which was constrained due to the lack of availability of AR15 parts due to Obama's re-election, is what I'm going to be building. I would like feedback on the list: what works, what doesn't, replacement, etc. Thanks in advance for your input. Upper Noveske forged Bolt carrier JP Low Mass Carrier and Bolt Barrel Rainier Arms Match Wylde 16" 1:8 Barrel Hand guard Samson evolution 12.37" Comp Miculek Gas block JP low profile adjustable SS Black Lower Rainier Arms forged Zombie Lower part kit DPMS - Lower Reciever Parts Kit complete Grip Ergo - falcon industries Buffer tube DPMS Receiver extensión tube Buttstock Double star - AR-15 ARFX SKELETON STOCK Buffer JP - AR-15/M16 LOW-MASS RECOIL BUFFER Spring JP tuned rifle spring Trigger JP trigger + speed hammer
