Search the Community
Showing results for tags 'Vortex'.
Found 14 results
-
Recently replaced my Vortex Viper with a Venom and noticed the threaded holes in the Glock MOS plate are stripping out. Any one have recommendations for an aftermarket plate that plays with Vortex?
-
I recently obtained my Shadow 2 Optic Ready. I had already purchased 2 Vortex Venom RDS months ago in anticipation for taking possession of the Shadow 2 OR as well as the P10F OR when it’s available in Canada. When I received the Shadow, I went about removing the rear sight plate, not a problem; installing the CZ Vortex Venom adapter plate to the Shadow, not a problem; installing the Vortex Venom to the adapter plate; big problem. The included hardware sunk into the foam, meant to secure the red dot to the adapter plate, did not fit the adapter plate. Try as I might, the bolts would not grab hold. Eventually I pulled out the calipers and started measuring and discovered that the bolts were about 1mm larger than the contact points of the adapter plate and in the right light, I noticed the wear on the ends of the bolts where they were wearing themselves on the surface of the adapter plate. As I had already been playing with the RDS, the box and contents it had contained were thoroughly rummaged in. I decided to open the brand new Venom box to see if the bolts included in there were a different size and that’s when I noticed the baggie labeled GLOCK MOS containing two additional bolts. These fit. So what I had done was stash that baggie under the foam in the original box because I don’t own Glock products (never will) so I figured the baggie with the bolts was of no use, glad I didn’t toss it though. Anyways, I’ve gotten a number of people watching my video on the Shadow 2 optic ready on Youtube, asking me about mounting the Vortex Venom as they are running into the same problem. Not all Vortex Venoms, be it 6MOA or 3MOA are shipping with that GLOCK MOS package of bolts, and you NEED those. I had contacted my retailer of the optic plate and they suggested the problem is with the Venom. The problem is not with the Venom. I think CZ didn’t tap the holes big enough to use the mounting hardware that Vortex provides with all their Vortex Venoms, that being the larger bolts stuck in the foam. If you’re running into problems, you may need to contact Vortex for the smaller bolts. I was at the point where I was going to either tap a larger opening into the adapter plate or reduce the size of the bolts in the foam, fortunately I didn’t have a tap/die set that would work for this and spent the time hunting for what was missing in the install. Good luck and hope this helps! -
As a part of my ongoing divisional tour of USPSA, I'm in the process of setting up a carry optics gun. Before I set up a Glock 17 gen 5 with one of my trusty RMRs, or join the dark side and use a 320, I thought I would solicit a few opinions on the best red dot for carry optics. I like and am relatively familiar with the RMR platform, and would use this for self defense, but the lack of dot clarity, blue lens tint, and small field of view is a bit off-putting. I'm seeing a lot of Leupold delta point pros showing up in competition lately, I like the glass quality, and lack of blue lens tint, but have concerns on battery life. Max Michel is having a great deal of success with the Sig optics Romeo 01 (but he's Max Michel), and I like the field of view, but not the biggest fan of the blue tint. Vortex optics has a great reputation and I run a lot of their optics on my more practical rifles. Their warranty is second to none, quality is always good, and I like the Razor I have as a side mount on one of my rifles. All that said I have very little hands on time with the venom, or viper. Any feedback anyone has on what you choose to use and why, or notable issues on the others would be appreciated. Thanks for your time all.
-
I like what I've read about this scope. Unfortunately, no one has one around here for me to look at. I'm currently running a Strike Eagle on my 3 gun rifle. I don't mind giving up 2x for better glass and a better 1x. Would this scope be that much of an upgrade over my Vortex?
-
Hello all! I've got a Bergara LRP in 6.5CM on the way and I'll be putting a Vortex Razor HD Gen II 3-18x50 with 34mm tube on it. I'm curious if anyone has this setup and could recommend a ring height. Or, if anyone has the LRP in 6.5CM, could you measure the distance from the top of the rail to the barrel from a point 7in from the center of the rail? That would help me calculate the max allowable offset. Any advice for the rings would be appreciated! Rob
-
I've been shooting 3 gun for 3-4 years now. Started with an MTAC scope then upgraded to the Burris XTR II 1-5. I have since added a second 3 gun rifle to my collection and need a scope for my 18" gun. I am torn between the XTR 1-8 and the razor 1-6. Cost is relatively close and weight is close. The center dots ar the same size (SFP Burris). I have had two failures with my XTR II 1-5, illumination failed, Burris replaced the scope, and now it has littl blacks specs all over the inside of th glass. The scope is currently being replaced again. This makes me a little hesitant to try another XTR II product. What is the general consensus?
-
Question for the group. I currently run 55 grain burner ammo for short range and 69 grain for long range targets in 3 gun. I am sick of having different zeros to remember and would like to simplify my rifle game... Other than cost and a potential decrease in long range accuracy on a windy day can you think of any other disadvantage to running 62 grain ammo for everything? I run a 16" JP PSC-11 with 1:8 twist.
-
I'm working on a Rem 700 SPS tactical 308 in a Magpul Hunter stock. Looking at scope bases, primary purpose of the rifle will be for mid range shooting, 500ish yards, just going to be a fun set up & I plan to hunt with it as well. Right now I am going to run a Viper PST 6-24x50 for a scope. Does anyone have a preference on the scope rail? I have a set of Seekins med height rings that I will be using. Just looking for opinions on the scope rail & whether or not the added MOA will be needed for my set up.
-
Anyone have any experience with this specific model? Looking at one for sale in a local GS. There are newer models that based on the description on Vortex's website says they have been upgraded. Is there anything that you prefer on the newer models over the one I have in the title?
-
I have an opportunity to get one of these at a really good price. I will be putting it on a 6.5 CM bolt rifle. I like everything I see about them, especially the lighter weight than the Vortex and even the Bushnell. The reticle seems to be very good, simple and un-cluttered. The eye box sounds very forgiving. The overall quality and durability appears to be excellent. I have a Bushnell ERS 3.5-21x 50mm with the G2 reticle on another rifle, and it is good glass, but honestly, I am not super impressed or blown out of the water by it. I have yet to not just dial elevation, so I don't see a "christmas tree" style reticle as a necessity. The substensions are so close on the outer edges that it is very difficult to use them for ranging. There is no illumination, although that may not be a big deal, I have only wanted it a couple times, but made out without it. Honestly, I thought to myself that other than increased magnification, the Bushnell wasn't that much better than my PST's. I have an astigmatism, and a little trouble with near vision. I will use +1.5 cheater glasses to see things up close. If the contrast is good, I can get by without the cheaters. Some days I can see the numbers on the Bushnell turrets better than others. The flat dark earth scope combined with black numbers may be part of the blame for this. The numbers just don't jump out at me like white on black. The Bushnell has locking turrets, but in a stage, to raise and lower the turret vs a very positive "click" to adjust elevation is not an advantage. While locking turrets was initially a very big consideration when purchasing a scope for my first rifle, I was looking at it from a 3-Gunner's point of view more than from a PRS shooter's view. I have yet to watch guys not dial elevations on every target of a stage if there is more than 100 yards difference between yardage (unless they forgot). I have been considering Nightforce and Vortex in addition to the Kahles. Has anyone spent any time behind the Kahles? What are your thoughts and considerations? Thank you, wg
-
Hello everyone, My name is Michael and I am the director of 3GUN4VETS. This is a non-profit organization designed to provide deserving combat veterans with a free 2 day 3gun clinic. Clinic includes instruction with top notch instructors from all over the U.S. weapons, ammo and equipment free of charge. We are hosting the first annual charity match to raise funds to cover shipping costs for the equipment as it travels all over the U.S. . Please come out and show your support for our veterans and this great cause. Match will have 6 stages, fee is $85 which will include T-shirt,dinner & beer after the match. There will also be a raffle for guns,bags,glasses,cases and other cool swag tickets are $5 or 5 for $20. Please sign up ASAP as I can only accommodate 72 shooters for this one day event. Match details and sign up are on 3gun4vets.com. We can also be found on Facebook and practiscore, help spread the word like the page and contact vets you think are deserving of this amazing opportunity. I hope to see you on the range!!! Match will be held in DOTHAN,AL @ the DOTHAN GUN CLUB 21/NOV/15 V/R Mike 3GUN4VETS-Director -
Fabulous new Glass from Vortex getting set up for a LONG range Match on the 338's 3-18x 50 FFP Gen II EBR-2C mRad and 4.5-27x 56 They are amazing These new models have push to lock turrets and the Illumination index is now mounted on the Parallax dial that is located midship and easily accessible. 34 mm Tube and they are very beefy, clarity and contrast are stellar. Hope to post a range report in the next couple weeks.
-
An in-depth review...
-
Now that we are deeper into the shooting season for 2013, what are the latest thoughts and reviews on the Vortex Viper PST 2.5-10x in first focal plane? I've got the second focal plane version and am interested in comments on the newer version. I saw early reports were favorable but curious how they are considered now after more use. Thanks in advance.
