xXGearheadXx

Are you trying to use the included drop that came with the INTL? if so, i had the same issue with mine. The problem was in the included drop. It's somewhat flimsy and when it bent in or out on the draw the gun (mine was a G34) would hang. Try a more rigid drop like a Boss Hanger....I'll bet that will fix the problem.

At online vendors, I haven't seen them higher than $1800...is the $2200 you're referencing Canadian or AU $s? My boss picked one up yesterday for $1600. at a more "normal" 1k vs $1600....i think the added benefits on the TSO pay for themselves. Better frame, checkering, grips, sights, thumb rest, magwell, hammer...all that i think would add up to the difference. Plus, the TSO is just a sexy beast out of the box. You certainly don't "need" to do anything to the trigger. My only complaint with the TS/TSO is the safety. I put the shadow2 safety on mine after having problems with both the stock safety and the extended version from CZC.

I wouldn't worry about this too much. I've had 3 gen4 glocks that took around 50 rounds of hot 124gr nato Aguilla before they'd cycle my powder puff gaming loads.

That guy is me...i still have em. Not sure what the rules are about hawking your gear here so please delete if this is a no-no.

Yep, it dropped right in. Can you post pics of the issue you're having?

I shoot thumb over safety.

The stock mag release on the S2 is awesome. I can imagine you could pull the screw and take the paddle off...but why?

Shot my match today with the shadow2 safety on the TSO. Just a club match but 4th overall and 2nd among pistol shooters (PCC Took 1&2) I had no issues with the safety and I believe this is the way to go with this gun. CZ USA needs to get it in gear and start offering this part on their website. I think ive finally got this gun running on all cylanders for limited division. -Chop the slide stop or use the included pins without slide stop to prevent accidentally locking the slide back. -CZ custom base pads with grams springs and followers. 21 rounds, 20 reloadable without tuning. -Blend the magwell. Easily done but from the factory this is the Achilles heal of the gun. Shadow2 safety. Ledged left hand side with flat right hand side. Springer pads relative to the CZC pads are junk. The set screws can be damaged by dropping the mag with a few rounds in them... not to mention they require a tiny ass tool to disassemble at a match.

Just an FYI, right after I got done cleaning my S2, I checked the frame width of the TSO and S2. To my surprise, the width of the frame on the TSO and S2 are identical. I was able to install the S2 safety into my TSO and I think this safety is the way to go with the TSO. The stock safeties are too far forward for those of us with small hands to reach. The CZC larger rocker safety is too easy to accidentally engage (as I became all too aware of at the Alabama sectional last week). Not to mention the right side ambi safety can be held upward if you get a little too high. The thin right side on the S2 safety eliminates this issue. I'm not sure if CZ has these up for sale yet but if they are, I believe they are the way to go. If nothing else it should help some of you justify a shadow2. After my match tomorrow i'll see if the S2 mag release is compatible with the TSO as well. The S2 mag release is awesome.

CZC announced on facebook that pre-orders have been filled and they have/had Black polycoat versions available for general sale. I'm guessing anyone left waiting is waiting on the Black/Blue

Op checking in. Got my call today for my 12/15 order from CZC. Black poly coat. Should have it Friday.

You use the top of the front post as POA, not the dot on the sight. The dot is not the point of aim, it's there the help you pick up the sight during the draw and track it during recoil. You could get a tall enough front to allow you to do that, but you'd be completely obscuring the target with front site focus...not good on distance shots and tiny little steel targets.

Now that they're starting to move, I think it would be helpful for those of us that have pre-ordered to have an official thread to track status of your shadow 2s. This should give the others of us who are waiting an idea of where we are in the pecking order. Post the following: Pre-order date: Vendor (if other than CZC): Type/color of S2: (i.e. black/blue, black/black, urban grey) Reciept date: A pic of your new blaster!!!! Cheers!

Mine came out just right with a 200gr major handload. I had to tweak height just slightly for the 180s i'm now using, but nothing that wasn't within the range of adjustment on the stock sights. You can go here, follow the instructions, and order the right height site. https://dawsonprecision.com/sight-calculator/

For those of us that have pre ordered we should post up here when we receive it and our pre-order date. I have one pre-ordered on 12/13/16