Jump to content
Brian Enos's Forums... Maku mozo!

Mountbkr

Classified
  • Posts

    178
  • Joined

  • Last visited

Everything posted by Mountbkr

  1. The guys I shoot high-power with have started using it, they are pleased with it. They are using it in a Dillon and see great results with consistency Sent from my SM-N950U using Tapatalk
  2. Have you verified that length by plunking in your gun? Sent from my SM-N950U using Tapatalk
  3. 8208 is really consistent in my 550, been very happy with it. I haven't seen any bridging at all Sent from my SM-N950U using Tapatalk
  4. Last update I saw was the Bluetooth was happening late Feb, I havent seen the announcement anywhere though to support that Sent from my SM-G955U using Tapatalk
  5. I took it last fall, great class with a very methodical way of executing the drills in his book. He explains why the drills are being presented the way they are and helps you understand the process he teaches. You will have a "drills" bay and a "stage" bay side by side, you do a drill several times and then part of the group goes to the stage bay to execute the drill on the mock stage.
  6. I hate to use the word here, but eBay if you watch for the right seller. 25.00 ish for a pack of 4, no shipping
  7. You wouldn’t look no more like a tool than most that shoot ha ha Sent from my iPad using Tapatalk
  8. Stryke Sent from my iPad using Tapatalk
  9. Normal for Shadow 2 from everything I’ve seen on here. I just bought one and the previous owner to me the same 1.090 oal Sent from my iPad using Tapatalk
  10. I guess I'm lucky STI and MBX run fine in mine, stock with no tuning Sent from my SM-G955U using Tapatalk
  11. I just completed the same task, just push the screw through the ridges, it didn't hurt them. Stick the allen wrench through the hole you drilled, put the screw on the end of it, start the screw the hole, press the allen wrench against the bench or table you are working at. Sent from my SM-G955U using Tapatalk
  12. Round nose for me, 180 gr Blue Bullets Sent from my SM-G955U using Tapatalk
  13. thats what i do as well Sent from my iPad using Tapatalk
  14. Varies depending on powder, load, gun and everything BUT typically, +.2-.3 difference in powder charge needed to get the same velocity if loading 1.18 versus factory specs. Sent from my iPad using Tapatalk
  15. Yeah that would be the best way to do it, load some dummies 1.18 or so, verify they will fit your mags and plunk in YOUR chamber. If they will fit both (and they should) you can start working toward your desired velocity Sent from my iPad using Tapatalk
  16. 1.180 here Sent from my SM-G955U using Tapatalk
  17. Federal would be a good choice as well, especially if you could find the Federal Syntech https://www.federalpremium.com/products/handgun.aspx Sent from my iPad using Tapatalk
  18. [mention=11460]MemphisMechanic[/mention] Thanks, very much appreciated !!!
  19. Maybe you could make YouTube video showing the process? Some of the noobs (including myself) could benefit from the expert instruction a video would provide. Sent from my iPad using Tapatalk
  20. I recently acquired a Akai 45 SS (the reason for the question about the slide stop i posted earlier) and have a mag question for the group. I have several 47D mags and if I Barney load the gun, its reaaallly hard to get a 47D locked in the gun. I have a McCormick mag that will load much easier in the gun and functions like it should so I’m thinking about acquiring several of them to use with it. Does anyone have any experience with the newer RPM mags, are they worth the extra price for them? I see they also have a “match” series of mags as well, same questions, experiences or feedback for either? Sent from my iPad using Tapatalk
  21. I just picked up a set of SS racer pouches to run bullets out configuration. I don’t have any time with them to form an opinion but it looks like they will do everything i need them to. Sent from my iPad using Tapatalk
  22. Thanks for all the feedback, confirmed what I already assumed. I believe a functioning slide stop will be the most effective route to take. Sent from my iPad using Tapatalk
  23. Here’s a great resource for that area https://georgiaipsc.com/index.php/about/ Sent from my iPad using Tapatalk
×
×
  • Create New...