Bapple

The only spare I have is for my Tanfo Stock 2. They are shorter than the one in the Witness P so it will not work.

My right thumb barely reaches the safety, much less anywhere close to the slide release. So I don't think I am inadvertantly hitting the slide release. Some other gremlin is showing up somehow/somewhere

I did shoot right hand only. So the left hand was completely out of the equation to touch the slide release while firing. Still happened. After coming home to take a look, I took the slide off and then inserted a magazine back in the frame with the slide release installed also. I dont see how the rounds could be hitting the slide release, there is more than enough room between the rounds and the slide release on the inside of the gun. What I did observe is the trigger bar looks very close to the bottom of the slide release.Do you think there is anyway the top of the trigger bar could be contacting the slide release and pushing it up?

Went back to the range today and put 150 rounds of 115gr. Blazer FMJ downrange. Switching to 115gr did not seem to help. The slide continues to lock back sporadically with rounds still in the magazine. Any other thoughts on why this would be happening? Thanks

Thanks for the help. Will test out some factory 115gr FMJ's and see how it goes. Will keep you informed, thanks again!

I was just using Blazer Brass 124gr. Should factory ammo cause the slide to do that?

Sorry, I must have double tapped the post thread icon, ugggg

Took my EAA Witness P to range today for first time. Felt great in hand. VERY accurate, my first 10 rounds were at 5 yds and all 10 were in a quarter size hole. Was having one major problem though. The slide kept locking back with rounds still in the magazine. This was just a few times either, I shot 100 rds through the gun and there could have been as many as 25-30 times where the slide would lock back with rounds still in the magazine. My first thought was, I must be riding the slide release. So I intentionally tried to keep my support hand away from the release. Did not seem to work. So then I thought, hell, lets shoot the gun one handed, then I know I am not riding the release because that hand isnt even touching the gun. Still continued to lock back with rounds in the magazine. I could not pinpoint when nor why it was doing this. Any help or suggestions or thoughts on what might be going on?

Took my EAA Witness P to range today for first time. Felt great in hand. VERY accurate, my first 10 rounds were at 5 yds and all 10 were in a quarter size hole. Was having one major problem though. The slide kept locking back with rounds still in the magazine. This was just a few times either, I shot 100 rds through the gun and there could have been as many as 25-30 times where the slide would lock back with rounds still in the magazine. My first thought was, I must be riding the slide release. So I intentionally tried to keep my support hand away from the release. Did not seem to work. So then I thought, hell, lets shoot the gun one handed, then I know I am not riding the release because that hand isnt even touching the gun. Still continued to lock back with rounds in the magazine. I could not pinpoint when nor why it was doing this. Any help or suggestions or thoughts on what might be going on?

There are no rails in the actual frame itself. The rails are integrated into the trigger housing and the sear/hammer housing.

My pre-order was sent in around end of October or first of November, not 100% sure. Received my Black Nitride Shadow 2 this past Friday from CZC. I have changed 1 thing already, that is to put in a 13# main/hammer spring. Dropped the DA about 1.8-2.0#'s. Didnt really affect the SA, if it did, it is hardly noticable. Oh, and I also added the extended safety lever that is included. Didnt like the flat safety that came installed. Here are a few pics...

I think the very beginning of November if I remember correctly.

Mine arrives at my LGS tomorrow, looking forward to getting hands on.

Just found this video from Shot Show 2 days ago. I think the video shows the Polymer Match which is SA. The Match Pro should be DA/SA. The Match does not look to have the cone fit barrel if that matters to you.

First, I never said this was a carry gun or had anything to do with carry. It is a match gun and full sized. Secondly, a lighter gun should point faster and transition faster. Some people like those characteristics more than others so YMMV. Last, why would I buy one? Why not? It is another Tanfo and you can never have too many. Would be fun to compare with the Steel framed counterparts.