Jmoreno88

Members
  • Content count

    42
  • Joined

  • Last visited

About Jmoreno88

  • Rank
    Looks for Match
  • Birthday 08/20/1988

Recent Profile Visitors

178 profile views
  1. 26.7gr cfe 223 under 55gr Sent from my SM-G928V using Tapatalk
  2. yup^^ i run a lightweight 16in 1:8 twist with rifle gas. low mass everything and jp adjustable gas block. Rolling thunder tunable muzzle brake Sent from my SM-G928V using Tapatalk
  3. I run the AR gold trigger now. Extremely light first stage so it feels very much like a single stage and by far the shortest reset I've ever felt Sent from my SM-G928V using Tapatalk
  4. small coat of pb blaster is what I've used Sent from my SM-G928V using Tapatalk
  5. Plugrs are the best I've used Sent from my SM-G928V using Tapatalk
  6. How much spring do you have hanging over? Sounds like not enough spring. Most guys run 12, and occasionally 13rd tubes with 12 to 16 inches of spring overhang. You shouldn't need to break in but some do. I ran 1145fps low brass right out of the box Sent from my SM-G928V using Tapatalk
  7. i do 50 yards. you'll be good to 200. Few inch hold over at close range. Sent from my SM-G928V using Tapatalk
  8. pistol holster, 2 extra pistol mags, extra AR mag, 2 shotgun caddies that can take up to 20 extra shells if needed. Of course all that is interchangeable depending on stage set up. Remove shell caddy to add extra pistol mag etc.. Sent from my SM-G928V using Tapatalk
  9. nordic +6, shooters source +2 extension, tti trigger springs, compact stock & limbsaver, MOA charging handle & oversize button, Benelli extractor and extended benelli lifter Sent from my SM-G928V using Tapatalk
  10. happens on my stoeger, either your shell catch has issues which is doubtful if you're not having any other problems or you're not shoving the last round in deep enough past the catch, which was my issue. Sent from my SM-G928V using Tapatalk
  11. I suspect it will. if you're shell plate is tight then the only thing affecting ejection is that nub. It sometimes wears at an angle and cause the case to ride up the "ramped" edge rather than hitting a flat edge and kicking out Sent from my SM-G928V using Tapatalk
  12. have a few of these myself. The second layer foam underneath is solid so I put the precut squares in the bottom and then took the solid and got it laser cut. Looks great and less than 50 bucks invested with the cut Sent from my SM-G928V using Tapatalk
  13. Tell them you want a new sub plate. Solved all my problems. The ejection nub is probably messed up Sent from my SM-G928V using Tapatalk
  14. i have the cmore railway 6moa on mine. I personally would not raise it up at all but if you want to then you get the railway tactical. It will shoot any ammo you have, at least in my experience it will Sent from my SM-G928V using Tapatalk
  15. for what its worth my case feeder runs great. I haven't had to do anything to it, just have to know how to use the different v blocks and adjust the timing with the slider bar. Once you know what you're doing its fairly easy, i switch between, 45, 9mm and 223 regularly with no issues Sent from my SM-G928V using Tapatalk