• Content count

  • Joined

  • Last visited

About tedahlenius85

  • Rank
    Finally read the FAQs
  • Birthday 05/05/1985

Profile Information

  • Gender
  • Location

Recent Profile Visitors

218 profile views
  1. I thought it was a good advice. Always wondered if it was ok to just release before reaching the toilet. Now I know I am not the only one. Thanks to that old timer!
  2. Is it always better to load as long OAL as possible? If my barrel accept 1.160" of one typ of flatpoint, do I loose a lot of accuracy if loaded to 1.100"? How does the "free flight" before touching the rifling really affect accuracy? Skickat från min iPhone med Tapatalk
  3. I cant imagine the barrel heating up to even 200F, its hold-able when warm. Still drops about 50fps. Skickat från min iPhone med Tapatalk
  4. Same with VV N320 & N330. And those are not supposed to be heat sensitive like that as far as I know.
  5. I chrono 3 strings of 5 shots per string. Average velocity and PF. Standard deviation is sub 10, so its pretty consistent. Skickat från min iPhone med Tapatalk
  6. It comes with medium springs from factory I believe. Mine did. Get a light fp spring and you might be ok, but probably not 100% with factory ammo. With Titan hammer, medium hammer spring and light fp spring you will be 100%. Skickat från min iPhone med Tapatalk
  7. I've noticed quite a loss in velocity when I chrono'd my ammo when I get to the range and shoot a cold barrel vs after a couple of drills when my barrel is heated up. I guess its expanding and ammo is loosing pressure right? But what is "normal" loss with a warm barrel? My 124gr fmj runs at about 1070fps with a cold barrel, and drops about 50-60fps when I chrono after doing some shooting and barrel is quite hot. In my opinion thats more than to expect. I didn't even notice any drop running my other gun, but my current Stock 2 seems to be heat sensitive when it comes to pushing out those rounds. Would appreciate your experience regarding this.
  8. Thx. But just bullet length then?
  9. Nice testing and documentation. Might I ask the lengths on those bullets you tested? Pretty short OAL. Skickat från min iPhone med Tapatalk
  10. Also had to put a spacer on it do get it straight.
  11. Maybe in USPSA, I am not too familiar with those production rules. I shoot IPSC.
  12. Its a OEM Tanfoglio part, just like the other types available.
  13. https://www.ericgrauffelonlineshop.com/en/frame-parts/494-safety-flush-.html
  14. Mine since new. How do I trim it to be more aggressive when throwing?
  15. How far does your Stock 2 throw the brass? Mine lands only about 1-2 feet from me. Its about the same with 8lbs & 10lbs recoil spring. Ammo runs at 130PF. Dont know how I can get it to eject further without going even lower on recoil spring, which I dont want. When I shoot strong hand only with a slight tilt, the brass sometimes lands on the gun. Any thoughts?