Jump to content
Brian Enos's Forums... Maku mozo!

4n2t0

Classifieds
  • Posts

    755
  • Joined

Profile Information

  • Gender
    Not Telling
  • Real Name
    None

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

4n2t0's Achievements

Calls Shots

Calls Shots (8/11)

  1. That must be it! I've been doing it right for decades, but started doing it wrong in the last 3 weeks. Problem solved!!! lol. Thanks to everyone who took the time to reply, I'll update the thread when I solve the problem.
  2. This is a great idea! I would have never assumed that the platform itself might be canted. I'm "meticulously anal" and most would think that my 10+ year old 650 was still brand new, which helps reduce most user induced issues. I really know/understand this machine well. I might have to just start thinking about mechanical failure in the frame/ram/platform. I might also have to setup a camera and record myself reloading in an attempt to see exactly when or how the cases get tilted.
  3. Just double checked the bolts and they are good and tight.
  4. I'll need to independently verify the data, as I always do, but Joe4d laid the foundation for my insane quest to pump as much 296/H110 into a .357 case as humanly possible.
  5. No worries. I've already loaded and shot 17gr. It felt and performed identical to 16.7gr, which was to be expected. Still no visible signs of pressure. Next up, 17.7gr! Yahoo!
  6. Thanks for the suggestions, I really do appreciate them all. I tried 1 pin, 2 pins, no pins but the problem persists. I think an alignment tool is in my future as well. I'll wait to hear back from Dillon and update this thread if/when a solution is found in the hopes that it might help someone else. I know many times I search the archives and find a solution to my issues on this forum.
  7. Both alignment pins are currently being utilized. I'll give it a shot, but since it seems that the case is already tilting towards the center of the press, I doubt allowing the toolhead to float farther away will help.
  8. I was reloading 9mm this weekend (147gr bullet over 3.65gr of WST, my favourite recipe) and I decided to take a few more pictures. Different toolhead, different dies (all Dillon), same tilting. Having the press lock up every 4-6 cases really sucks! Has anyone successfully integrated one of these on a 650? It would save me from poking the cases into the sizing die all the time.
  9. There's nothing wrong with the brass as far as I can tell/measure. Maybe I'll double check the toolhead next. Dillon contacted me to obtain more information, hopefully they can provide some advice that will cure the problems I'm having.
  10. Warning: I don't know $hit about 38 super or combo seat/crimp dies but isn't this what you're looking for? hXXps://www.grafs.com/retail/catalog/product/productId/102601 (replace xx with tt)
  11. The shellplate is clean and tight, no wobble. I might check the brass, I guess you never know. Weird.
×
×
  • Create New...