• Content count

  • Joined

  • Last visited

About acoop101

  • Rank
    Finally read the FAQs

Contact Methods

  • MSN
  • Website URL
    San Luis Obispo, California

Recent Profile Visitors

146 profile views
  1. I have always liked the classic 2.7-2.8 grains of bullseye and a 148 grain hbwc. Veeeerrrryyy soft shooting and it cuts nice clean holes. Sent from my XT1565 using Tapatalk
  2. Xtreme bullets. Sent from my XT1565 using Tapatalk
  3. That is the creation of Satan! Sent from my XT1565 using Tapatalk
  4. I like the s&b primers, cheap and even my worked over guns go bang with them. Sent from my XT1565 using Tapatalk
  5. 38 super comp or short colt? If 38 short colt I just switch to a 38 special conversion and a 38 special sizing die. Everything else is 9mm Sent from my XT1565 using Tapatalk
  6. Try wiping down the inside of the hopper with a used sheet of fabric softener and then ground your machine. Sent from my XT1565 using Tapatalk
  7. I would pull the tool head and dump the powder if you are not planning to load for a while since the powder will discolor and weaken the hopper. If you are going to load again in the next couple days, I would not worry about it. Sent from my XT1565 using Tapatalk
  8. Does the rifle shoot this load to your needs? Can you hit the targets you need to hit? I would not spend the extra money on the BR primers since that level of consistency isn't needed for your application. When I ran out of wolf srp I went to Winchester because they were on sale and I have had no problems with those primers in an ar platform.
  9. I have the chance to stock up on this powder for a very good price but I am starting to wonder if it is a red headed step child since Alliant doesn't seem to have very much information on it. I am wanting to load up blasting ammo and I am wondering if anyone has come up with a load like the 24.5 grains of TAC that runs well and shoots well. Even for blasting ammo I have been using the 55 gr. varmint nightmare from midsouth since they seem to shoot as well as anything and do one hell of a job on ground squirrels and paper targets. If anyone is using this powder if they are willing to share what is working for them I would appreciate it.
  10. I just bought a pound of tight group going down the rabbit hole finding your other different powders for 9. I haven't loaded with it yet because I am using up the last of my clean shot from Shooters World which is supposed to be very similar to Accurate number 2 and I've been very happy with that. I just finished up my last 5# jug of that and I'm looking at something I don't have to order. Sent from my XT1565 using Tapatalk
  11. I like 124's for 9mm, they seem to give a happy medium between heavy and light. Sent from my XT1565 using Tapatalk
  12. Load starting load then work your way down untill you loose reliability and step back up .1 grains and call it good. Sent from my XT1565 using Tapatalk
  13. Any volatile solvent will work. What's the solvent is applied it will evaporate out of the Polish Sent from my XT1565 using Tapatalk
  14. Working at a range so I can take full advantage of the brass credit program. Sent from my XT1565 using Tapatalk
  15. Go to and plug your powder and bullet weight to get your max and min. I would never blindly trust load data from a forum without checking against published data. Sent from my XT1565 using Tapatalk