ksorrell

Maybe its brighter on the RTS2 but my teammate is running the 4 moa on his railway and it was the same as the 2 I put in mine.

Update. The 2moa dot was a complete failure in bright sunlight. Couldn't see the dot the whole match and basically point shot the entire thing. Went home put the 8 back on re-zeroed and won PCC at another match on Sunday.

I had the 8 and switched to the 2. I thought the 8 was a little big for precision shots with tight hard cover or no shoots. We'll see how it works. First time running the 2 this weekend. It zeroed like a monster. 10 shots in a 1" circle at 15 yards.

C-More Railway 2moa on a JP GMR13

Have you called JP?

Good luck at the TTI match this weekend. I had to withdraw due to work. I did receive the +.5 script glasses. Seem much better in dry fire. Will try them out in a couple of local matches this weekend. Thanks again for the tip. I never would have known you could go lower than +1.

Just ordered some .5's. We'll see how that goes.

This is something I definately need to try. I've been using a +1 in my Right (dominant) eye and no script in my left. I didn't even know you could get +.5. I think as you are doing if I drop to a +.5 in both eyes it might help my old eyes out with adjustment and transitioning from medium to far targets. Ill be following your progress on this one.

Make sure your sear spring (the 3 prong spring steel under the mainspring housing) is installed correctly. If the 3 prongs aren't set properly this problem can occur.

Bring a pair of gloves or some throw away hand warmers. It can be pretty chilly first stage or two and you do not want your hands cold and stiff when it comes time to shoot.

A lot of clubs reduce the Match fee by a few dollars if you are a member. That in it's self can be a reason to join.

Bought 5k and was having problems with the first 1k till I noticed the plate on my Dillon where you slide the case onto the shell plate had come lose and the screw that had backed out was keeping my primers from seating all of the way. Once I fixed this the last 4k ran with no problems at all. If you seat them well they will work perfectly.

Mine went on a STI Edge with no smithing.

Its open back up for wait list