Leadpilot
-
Posts
178 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by Leadpilot
-
Possibly. I’ve had that happen to me with PrimaV and Shooters world major pistol.
-
The N320 of 10+ years ago was faster than the stuff they sell now, I’m wondering if the load data has been updated. That happened when clays production went from Australia to Canada.
-
Have you tried Titegroup for shotgun loads? I prefer TG to any of the dot powders for 12 gauge.
-
Using Dillon Vs Lee Dies
Leadpilot replied to ShootingPilot's topic in Dillon Precision Reloading Equipment
I marked up a couple rounds before crimping with a factory crimp die and see no evidence of bullet swaging. The bullets are .356” seated to 1.10”.
-
Lee FCD Remove 750XL Case Flare?
Leadpilot replied to fatfart's topic in Dillon Precision Reloading Equipment
I marked up a couple rounds before crimping with a .356 135gr bullet seated at “1.100 and you can see that the FCD sizer doesn’t touch the brass where the bullet sits.
-
I had the 4 inch mount on my 1050 and it was solid as a rock. As far as rigidity goes get the inline fab bin bracket, it makes a significant improvement in rigidity between the press and case feed mount.
-
That’s what he did for me. I sent him the specs for my Ponsness and I couldn’t be happier with what he sent me.
-
What 1050 "Upgrades" are worth it?
Leadpilot replied to kuric's topic in Dillon Precision Reloading Equipment
The Inline fabrication output bracket is a nice upgrade and is a must as far as I’m concerned.
-
Stand alone mount for Mr Bullet Feeder found!
Leadpilot replied to AbitNutz's topic in non-Dillon Reloading Equipment
http://mrbulletfeeder.biz/ I called him to order one. -
-
Sorry no pics, I sold the gun a few months ago. I think I posted a pic of it, I’ll see if I can find it. I did change the angle so it was a bit forward.
-
I cut off the first hole of the ipsc Alex thumbrest then drilled and tapped a second hole straight to the optic mount. I only had to zero the gun once in two years.
-
Wow, nice work! Digging the clear housing.
-
There is a special place in heaven for those in the business of life saving.
-
650xl with Mr Bulletfeeder or 1050?
Leadpilot replied to Cliveb's topic in Dillon Precision Reloading Equipment
^^^The priming system alone is worth the price. -
Bummer. The czechmate barrels are easy to cut but I couldn’t cut the shadow 2 barrels.
-
https://cajungunworks.com/product/86053ts-fully-adjustable-sight-set-for-tactical-sport/ The front sight is listed also
-
My father-in-law did the machining. When I get home, at the end of the month, I’ll weigh it for you.
-
?
-
It’s bi-topped, just took material off the sides and left the top.
-
I followed these directions and couldn’t be happier with the outcome.
-
Burn rate is the only common factor. I’ve found that the Lovex is cleaner and much softer in the hands. In the pic Lovex is on the left and aa#7 right.
-
Way too fast for 9 major. The closest vectan powder (in the U.S) to make major is BA7.5, and it is still too fast for me.
-
Help starting load for 9 major using VV 3n38 and 124 CMJ
Leadpilot replied to Gviz's topic in 9mm/38 Caliber
Yep -
Czechmate *thumb rest [generic]* and slide racker question
Leadpilot replied to AngeloConde's topic in CZ
https://ipscalex.com/products/alexrest-for-cz-czechmate
