• Content count

  • Joined

  • Last visited

About Leadpilot

  • Rank
    Finally read the FAQs

Profile Information

  • Gender
  • Location
    San Diego
  • Real Name
    Ryan Markley

Recent Profile Visitors

275 profile views
  1. I emailed Dillon a video of my sdb ram wobbling and they sent me a rebuild kit with new bearings and bushings for the whole machine. Good as new.
  2. I used an inline fab ergo handle and ultra mount with my case fed 550 with no issues.
  3. Interesting. My 130 avg PF for all three were; 3.1(PV), 3.3(N320), 3.7(BA9.5). 1.140 oal H&S 147gr SP01
  4. I'm doing the same thing. I'll probably drill out a hole or make a hollow bolt just in case. I'm digging how deep/consistent the primers are seating now.
  5. Nicely done! I prefer the long slide as well.
  6. Yes
  7. I didn't weigh it before the cut but now it's 13.3oz
  8. Here's mine. I took a couple thou off the inside of the dust cover just below the frame rail and the radius. I also had to reprofile the "peanut" on the barrel to match my shadow barrel.
  9. Acme 124 on the left H&S 125 on the right
  10. Acme 124 on the left H&S 125 on the right
  11. I really like these bullets. I can't give you any plunk and spin data because my CZ barrels are reamed, but his 125/147 profiles are different than the other brands. The accuracy, prices, and shipping times have been excellent.
  12. Those marks are from the bullet bouncing back up and smacking the brass in the kinetic hammer.
  13. Yep. It's a slave pin
  14. I'd give CZCustom a call and see what company they use.