Jump to content
Brian Enos's Forums... Maku mozo!

s2000red

Classified
  • Posts

    96
  • Joined

  • Last visited

Everything posted by s2000red

  1. Welcome Tom. Dad taught me reloading back in the 70s with a RCBS Rockchucker. Even though I have a Dillon 1050 and 550, I still have two Rockchucker Jrs I use for match rifle ammo. One from 1976 and one from 1977. Thank you for working with wounded warriors and adaptive shooters. That is very commendable.
  2. In addition to jpl's question, if it has the locking mainspring housing (ILS I think they call it), they have a very heavy mainspring. Many folks swap those for standard mainspring housings and springs.
  3. Used this to mount a slide ride on my Dad's black mamba. https://www.shootersconnectionstore.com/C-More-Rail-P139.aspx
  4. There are a few loads on this page that made major. http://www.natoreloading.com/bluedot/
  5. I shot it in 2019. There were only around 240 shooters. There were so few shooters, Instead of having 1/2 day AM and PM squads, they grouped us all together into one group.
  6. IVC, it is addressed in Appendix E and the penalty is 6.2.5.1.
  7. Thanks again for an awesome match Zack. I was getting emails with my stage scores within seconds of finishing a stage.
  8. You might have to adjust the alignment pins in the toolhead. I had to do that on one of mine. https://forums.brianenos.com/topic/223818-my-2nd-super-1050-head-alignment-pins-saga/
  9. Thank you for volunteering to work the match. Three generations of us (79 yr old Dad, myself, and my daughter) will be there Sunday morning. Hope to meet you then.
  10. Shooters Connection shows they have some Red Hill Tactical holsters for the X5. https://www.shootersconnectionstore.com/Red-Hill-Tactical-Competition-Holster-P5346.aspx
  11. Got a shipping notice today.
  12. I don't have a proper way to measure but holding calipers at the holes, on my 1050 small primer slide I get a top hole diameter of about .210 and a bottom hole diameter of about .195. Again, just rough measurements. The primer should sit on the "ledge" in the hole and be pretty flush with the top of the slide.
  13. Placed an order for 9mm 125s on 6/14. Nothing yet.
  14. My son has one and his had a few problems as well. Do a search online for tuning the extractor. Basically push/pull it until it barely (or just hints at) touches the bottom of the bolt. Also push/pull until the tip of the extractor hook just barely touches the "rib" in the cent of the bolt on the bottom. Once I did that, his has run flawless for many 1000 rounds.
  15. I have 2 Mark III 22/45 lites and my Dad has the same in Mark IV. We have shot them in steel challenge for several years and have had very few issues with CCI Mini Mags (both 36gr and 40gr) and Blazer in the 50 round box (not the bulk box stuff).
  16. This might help. http://www.natoreloading.com/9mm/
  17. Solsand, I have tremendous respect for you for posting about your error. Glad to hear you figured it out and really glad that you are okay.
  18. Edited to add new picture. Brand new American Eagle 115gr.
  19. Hey Chuck. I know you asked for unfired but I had taken these earlier. I promise they are pushed into the chamber as far as they will go. Any others, just let me know. Thanks.
  20. Here are two of my Sig barrels. The black barrel is from a 2/2020 production X5 Legion and the silver one is from an early X5 (like the one the OP posted). Notice the silver barrel has a taper around the chamber and the new black barrel does not.
  21. My Dad got an Underwood M1 Carbine back in the early to mid 60s. Ordered it from the DCM (pre-CMP) in Anniston, AL. Says if he remembers correctly he paid $23 or $24 dollars and change for it shipped. Wish he had bought a truck load of them.
  22. Like chase214, ordered Montana Gold on Wednesday and they shipped yesterday.
×
×
  • Create New...