Custom Glock Racing

Anyone making them? Found an old post about them here but links are dead.

Fingered it out. Its been 15+ years since I set up one of those dies and I forgot about the internal adjustment. Working now with 77s

I'll try that, but are you loading with 55s or longer 75s and 77s?

Bought a Redding comp seating die to load 223 in an 1100. The collar thing hangs too ow and knocks the bullet off coming into the seating station. Is there a fix for this or another micrometer seating die that works?

VV 3N37 is awesome for Subsonic 480s

I like regular CR Speed pouches for mags up to 170mm and their PCC specific pouches for 30-60 round sticks.

I ran the SC version with Ti comp in SC, USPSA PCC and Outlaw PCC. Recoil and dot movement is minimal, just a mild thump to the shoulder. I would get the SC version no matter what from of PCC youre into. Great handguard, and its under 6 lbs with an Aimpoint H2

A few wrong handed people tried my JP5 and they all liked the controls.

Part 2 of my review is out. It has comparisons to the MPX and GMR https://www.gunsamerica.com/digest/is-the-jp-enterprises-jp5-an-mp5-killer-deep-dive-part-2/

Part one of my review is up. https://www.gunsamerica.com/digest/is-the-jp-enterprises-jp5-an-mp5-killer-deep-dive-part-1/

No, not the same but TF is working on a JP5 magwell

Yes

Get the Steel Challenge version, it comes with a great mlok handgaurd.

Yes, but by a smaller margin. Stock prototype no tuning JP5 was about 10% flatter than tuned MPX when I tested them head to head. Less maintenance and much much easier/faster maintenance.

I put a little over 3k rounds through mine before I had to return it to JP. The last 2500 rounds were with no cleaning or lube. I had 4 clickers, 3 backwards primers and 1 sideways primer. Zero malfunctions. I'd say its very reliable.