please let me know if the method I list below helps avoiding a SQUIB.(this is just me)
1. always make sure you have enough powder on powder tube.
2. get a low-powder sensor (optional but also important)
3. always make sure that you see a powder on that shell before you drop the bullet for seating (don't assume)
4. avoid talking to somebody or multi-tasking if you are reloading.
5. if, you need to attend or do something important, finish or remove the remaining casings on the shell plate
and start all over again when you have the time.
6. separate loaded bullets every 100 rounds/batch (this is just me) so if you start wondering if you miss a powder or not. you can
just easily determine what batch.
7. always make sure about your bullet/powder weight, OAL , primer seating , and case gauge all you ammo.
8. avoid mixing powders (make sure you have the same powder before you add some more.( I always make a note/tape on the powder tube what kind of powder)
9. if, you are reloading lead bullets (always use a glove to avoid contact or minimize contact with lead.
thanks for reading this and please let me know if there some more I need to know to be a safe and happy reloader.