Jump to content
Brian Enos's Forums... Maku mozo!

Ub3RDoRK

Classified
  • Posts

    68
  • Joined

  • Last visited

About Ub3RDoRK

  • Birthday 05/21/1984

Profile Information

  • Gender
    Male
  • Location
    Murrieta, California
  • Real Name
    Cameron Wales

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Ub3RDoRK's Achievements

Looks for Match

Looks for Match (2/11)

  1. I've been running the t1 For a while. It works, but it feel it could be better. This is why I'm going to switch
  2. Pretty much. I feel it's marginal. I almost am thinking of doing the t2 then adding ports and testing. A set of ports at a time... Hmmmm
  3. How's the dot track...because they claim with the side ports it makes it go straight up and down....assuming you have perfect grip.
  4. excellent, T thats what i needed to know. Thank you.
  5. ^^ exactly. How much fitting would be required for this since i have a TruBor already?
  6. I have a T1 comp in 9mm, looking for a bigger comp and came across the "Thundercomp 2" from brazos. Its essentially a t2 but with 3 ports on each side and wondering if its worth it...So my questions are: Will the "Thundercomp 2" be better than the standard T2 comp? (preferably looking for experience with this comp direct. I have a gunsmith to do work if necessary, but will this require much since its already a "TruBor" barrel? The website says its chambered for a .355...knowing that 38 and 9x19 is the same diameter but anything else need to be done to run 9mm? Anyone have some decent load info to start with? Currently I'm running 8.2gr HS6 with a 125 B&B bullet, and a LRP. 170-172pf. aaaand go!
  7. Ive had the same problem with many many many rounds through my 550b. I ended up not realizing the screws that held the primer action bar...i guess you'd call it...were way too tight. I loosened them up a little, re adjusted, replaced the tip of the primer tube, set the adjustment of the primer cup and cleaned it all...after that it worked like a champ! I just make sure i clean it and re adjust after every couple thousand rounds loaded.
  8. I looked at the IPSC one...it looks nice but was concerned about fitment under the mount.
  9. ok that actually works...i just didn't know how tall it was. Thanks.
  10. would you happen to have a photo of it mounted?
  11. assuming it has the extended screws for mounting?
  12. I have a 90 degree set back mount looking for a thumb rest . I like the placement of the go gun thumb rest with it for bigger hands. Ive tried the slide stop thumb rest and it wasn't in the perfect spot for me. So my question is, will the go gun thumb rest work with this optic mount?
  13. Anyone try the PT slide stop thumb rest? Ive given the Shooting Sports Innovations model a try for a match, seemed nice but was wondering the angle of the PT one being more aggressive may fit my hand a little different. Second, how is the finish on the PT slide stop?
×
×
  • Create New...