kellymc

Ive got two. My lw commander 9mm would not extract because the chamber was cut two deep

Or clean up after the birds anymore

I had a 1/2 dozen case head ruptures in just 300 rounds. Zero with the KKM barrel

As a follow up I found no leading shooting CCI mini mags. Evidently they are sized for my revolver and have a true plated jacket instead of gold paint. Also no primer ignition issues. Feel much better about my sw617 purchase.

Thanks. This is the route I’ll take . Right now I have my GS replacing a Dan Wesson 9mm barrel because the factory cut the chamber way to deep. It’s not been a good month for my used gun purchases. Thanks for all the reply’s

Thanks for these reply’s

I recently purchased a 617-6 used. After 30 rounds there enough leading in the first 1/4 inch of the barrel you can’t see the rifling. After 80 rounds a cleaning rod won’t go down the chamber. There’s no lead anywhere except inside. Look for any ideas on this disappointing issue.

Received the 40 cal 180s in about 7 days. Nice smooth coating

great discount and free shipping. giving your 40's a try

I had rounds like that and chambering issues with a 3die set. Add a Lee factory crimp die and it went away. The lee die created another issue but removing the case lube seems to have fixed it.

If I didn’t already have a DW and WC I’d buy the Springfield in the BE classifieds

They weren't cheap but i tried Lohman Arms and Ginex spp Received them in 4 days

My KKM came in about a week ago. Have not fired it a lot. I know the chamber is tighter but still feeds my reloads fine. No case separations yet. I need to get it out this weekend again. I'm pretty sure the groups with 4.1 sport pistol and a plated Everglades bullet are going to be much smaller then the same powder and a coated bullet

Got mine out again. Quit using the loading tool and started just slightly using the bumps on the side of the mag. Everything started working perfect no more skipping the second round. Never had feeding issue with std vel cci

Got to shoot my a bit this weekend . It never Jammed but it also skipped the second round most of the time. It didn't madder it the mag was full loaded or 3/4 loaded. I did use the enclosed loading tool most of the time