Jump to content
Brian Enos's Forums... Maku mozo!

MP9

Classified
  • Posts

    96
  • Joined

  • Last visited

Profile Information

  • Real Name
    Michael M

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

MP9's Achievements

Finally read the FAQs

Finally read the FAQs (3/11)

  1. Hi all. I have been reading for some time but but haven't found so much info. Don't know why, but I have some curiosity on how the slide cuts and milling is done. Not sure if CNC milling is what is still used for that or maybe laser?.. I read a little bit of cncguns, grizzly, little machine shop but still very basic, any feedback is appreciated. thanks
  2. Weird thing, I removed the front sight and when I went to put the .180: first, it is too loose that I couldnt install it. second, the .180 sight fit flat with the frame. No as the one in the picture. so I dont know if i have a different wrong front sight. i will check the 020-276 and maybe order it. thanks
  3. Thanks , I appreciate all the recomendatios. I will try to sand down the sight or getting a .160 also, what extended safety could be used on it?. I
  4. Thanks. Would you mind to let me know the exact model you got for the RIA hi cap? I got one that is .180 but not sure if I will have to adjust the rear too high. I see a lot of sights listed on DP but not sure which one will work. A friend gave me one? it is the 020-180-00 , not sure if it will work.
  5. I got a RIA pro match, i dont like the big front sight, I was wondering which dawson precision front sight I could use to replace it(that fit the slide notch). Does any 2011 front/s would work? also, are there different grips that I could switch to? what bigger safety could I use? Thx
  6. Hi all. I have a czc shadow(since 2+ years) Cleaning it today l noticed that with the hammer down I can engage the safety on(without forcing it) and when pulling the trigger it will fire... when cocked and locked, it won't fire. So safety works fine in SA. cant remember exactly how it was before, i think it may let me pull the trigger but it didnt fire. My main cooncern is that Im not sure if that would be a DQ, Im going to idpa nats in 2 weeks so wanted to make sure before in case i have to change any part on the gun. Any thoughts?
  7. I got a new DeltaPointP , today i just used for the first time for my CO Cz, after like 60 rounds i noticed that the 2 screws on the side next to where it says DP-Pro were gone, these are to hold the cover/frame of the len ... does anyone know the size so i can order them? I will try to call leupold this week but if i can get any screws locally Would be good and quicker. thanks
  8. Does anyone knows what is the factory main spring # and recoil spring # for the shadow 2? Does the shadow 1 trigger spring works in the S2? I have one available but not sure thanks
  9. MP9

    SP01 For carry optic

    Thanks. When I insert the mag, there is like 2 mm gap between the grip/magw and the basepad, is that normal? thanks
  10. MP9

    SP01 For carry optic

    Thanks all. I got the Leopold DP pro and a CZC multi sight base. the Deltapoint has already a very thin mount base, should I remove it or should it be let there when installing? thanks
  11. MP9

    SP01 For carry optic

    Thanks. I got the CZC multi sight and kit 11522 to get it ready. with mecgar 17 rounds, TTI +4 base pad. does it need any fit or is good to go?
  12. MP9

    Max capacity 140mm

    I got the mecGar mag 17 AFC, TTi based pads and the CZC 11522 kit . for my CZ SP01 Does it require any fit or assemble and good to go? When I insert the mag, there is like 2 mm gap between the grip/magw and the basepad, is that normal? thanks
  13. MP9

    SP01 For carry optic

    Thanks for the input. I have been reading a little about it today. regarding brands, looks like the Delta Point pro new model is bigger and very popular and good quality. I see the delta point pro is around $369, $399, https://www.amazon.com/Leupold-119688-Delta-Point-Reflex/dp/B00NWIYAD0/ref=sr_1_1?ie=UTF8&qid=1493772937&sr=8-1&keywords=leupold+delta+point+pro which size is more common, 2.5 , 7.5? any thought on the vortex? what about trijicon? thanks
  14. MP9

    Mag break for CZ SP01

    Hi all. I have a SP01 that I have been using for dry fire a lot.. the mag break require a replacement.. when I look at the czcustom i see 2 options.. does any of you know the difference and if any of those 2 will work? advantage? Any help is appreciated. thanks https://czcustom.com/cz-parts-all/mag-releases-brakes/cz-75-ts-mag-brake-stainless.html https://czcustom.com/cz-parts-all/mag-releases-brakes/cz-75-full-magazine-brake-flat-shadow.html
  15. MP9

    SP01 For carry optic

    Hi all. I have a spare SP01 that I would like to use to carry optics, I know nothing about red dots, mounts, etc.. I don't want to mill the slide. just to use maybe a czc dovetail. any recommendation in sight mount and red dots? the other day was talking to someone and was told there are some small one where you don't get so much visibility, not sure how important that is. thanks
×
×
  • Create New...