Jump to content
Brian Enos's Forums... Maku mozo!

ny700

Members
  • Posts

    22
  • Joined

  • Last visited

About ny700

  • Birthday April 14

Profile Information

  • Location
    Dallas
  • Real Name
    adam lippman

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

ny700's Achievements

Looks for Range

Looks for Range (1/11)

  1. So I usually run round nose 115 and 124s. Decided to load up some xtp's and the slide isn't wanting to go into batttery then it's nearly impossible to rack. I actually had to field strip it to get the live round out. I've loaded thousands of rounds with various fmjs never an issue Is this an OAL issue I'm able to run the round nose rather long like 1.130 - 1.140 With the xtps I ran 1.08 -1.110 Thoughts? Sent from my iPhone using Tapatalk
  2. Have to agree. CGW is top notch. First attempt to upgrade my SP01. Several emails back and forth always with quick response. I place my order and in the note area I wrote about what my intent was with the parts order and asked if there was anything they though I was missing to contact me so I could place an order. Well they didn't contact me but they did throw in free of charge a front sight pin and wrote I would probably need this when I pulled the front sight as the original would probably get mangled. Now it's only $1. But it was the fact that they read the note took action and went out of their way to make for a smooth install. Big slow stupid companies view that as a waste of time money and resources. Customer focused companies view that as earning a lifetime customer!! Sent from my iPhone using Tapatalk
  3. Ok I'll try popping it off and reinstalling it. It's level with the left side and functioning it just has play in it that I don't remember it having and it doesn't sit tight to the frame Sent from my iPhone using Tapatalk
  4. No one? Sent from my SM-T217S using Tapatalk
  5. I have an Sp01 tactical Pulled the decocker levers off upgrading the hammer this weekend and now there appears to be excessive play on the right side to the point where it rattles when I shake the pistol. Did I do something wrong on the reinstall or bend something Sent from my iPhone using Tapatalk
  6. Tok thank you exactly what I was looking for!! Sent from my iPhone using Tapatalk
  7. So this weekend I final dove in and tore down my sp01 tactical. Replaced the bushing, the hammer and disco, and the trigger using the CGW RRK with the modified 85c trigger that has the two set screws. So I think I'm just too exhausted to work on this any more but I've been moving these set screws in and out all over the place. Right now I have full function and reset in DA and SA However I feel like this thing pulls for days and the final break is mushy. It feels like in DA I have the same pull length as befor just the trigger start location is further back And in SA I have this huge take up with no weight then a light stage and the. A mushy wall to a very light brake. I'm assuming the set screws are there to assist. Can someone just break it down for me the difference between the upper and lower set screws and how in and out will effect the pull Sent from my iPhone using Tapatalk This is the new rest position SA rest position And this is right where it wants to brake
  8. Just installed mine. Used 11mm 1/4" socket and a 3" socket extension. Then I taped a punch to the socket extension. Took (or 6 good wackos with a hammer and came right out. Actually came right out clean could reinstall it is needed. Sent from my iPhone using Tapatalk
  9. Wondering is there is a flat trigger upgrade I can drop in but maintain the DA/SA. The ones I've looked at indicated SAO.
  10. So my initial game plan was to upgrade with an 85c trigger short reset and reach reduction system from CGW and also add the race hammer, SS guide rod and new wire recoil spring for it. Will that as is function with the kadet just leaving the main spring alone ? And if so would someone hazard a gues on pull weight. If the DA pull stays as is at say 12#. I'm ok with that as long as it's a bit shorter reach. But I want to get that SA pull closer to 3.5# short and quick
  11. I'm looking at CGW up grades for my SP01. I want to reduce the da/SA trigger pull and was also consider the 85c trigger and short reset kit, but I run the kadet conversion a lot and just want to make sure that I don't mess with reliability as it's been flawless out of the box. Are there any specific things I need to do or need to avoid to hit the balance between both uppers Thanks
  12. I am I feel like I'm all over the board. So I'm looking for my first CCW pistol and like many before me trying to minimize the risk of going in the wrong direction. I'm looking at guns from the size of the Sig 938 up to the CZ p07. Like most people I prefer shooting larger fire arms and want to make sure that I enjoy shooting what ever pistol it is enough to encourage me to be as proficient with it as possible Just not sure is something the thickness of a P07 realistic to cary IWB since OWB won't always be an option? Since I'm most proficient and comfortable with a DA/SA should I stick with that? Since my go to firearm is a CZ SP01 I figured it may be advantageous to stick with something with the same controls. Or do I go with a shield its light weight thin an I'm familiar and comfortable with the M&P line?
  13. Review is needed as well as size comparisons. Really thinking the sub compact is the way I want to go. But compared to a czp07 or shield its a big step up in price so I want to make sure I'm making the right selection
  14. Had been thinking about getting a CZ Rami or a Sig 938 ....well also debating on a shield or a P07 or p01. Clearly in having a dilemma. Than I saw the Sphinx sub compact and thought hmmm a more refined Rami. Was wondering if anyone has actually shot or carried one. I know they are extremely limited in circulation right now and if so what are your thoughts on the halo sight Thanks
  15. ny700

    Rami P01 hybrid

    So the other day I saw someone selling a Rami lower mated to a P01 slide. Sounds like a great combo for conceal cary. Wondering if this is something readily available for order, an if anyone had any experience with one?
×
×
  • Create New...