Bought a Hornady lnl ap press, 9mm dies, and shell plate. Had a problem after loading a round was able to push bullet into brass. After talking to Hornady found out the die set I bought was a roll crimp not taper. They sell a set with taper crimp and a set with roll crimp. My question to Hornady was why do you sell 9mm roll crimp die set? Bought the bullet set and taper crimp die. Next used their .355 apex to bell the case mouth again not enough bell. After reading forums heard about an after market unit bought it. I was happy with the after market component it belled the case mouth at a taper but when you advance to set oal and taper crimp sometimes the bullet would fall out of the brass. So, I decided to buy the Hornady apx .357 guess what can"t set up to drop a charge because it is for a 38 case not a 9mm. Made a bushing to use with the .357 apx now I get the case mouth bell I want and case expansion to hold the bullet in place when the press advances to the next position. Hornady doesn't make a low primer alarm, would be nice, again after market components. Talked to Hornady asked them a question which they couldn't answer do the shooters they sponsor use their press? Wanted to buy blue but because of the wait time I bought red instead. Red needs to step up and get in line with blue and green!