Jump to content
Brian Enos's Forums... Maku mozo!

Amerflyer48

Classifieds
  • Posts

    486
  • Joined

  • Last visited

About Amerflyer48

  • Birthday 11/02/1970

Profile Information

  • Gender
    Male
  • Location
    Jacksonville/St.Augustine Fla.
  • Real Name
    John Resendes

Recent Profile Visitors

725 profile views

Amerflyer48's Achievements

Looks for Target

Looks for Target (4/11)

  1. https://wittmachine.net/sound-mitigation-equipment/
  2. not a calculator but this will give a ballpark idea,..of course always best to verify with your setup.. in short 25yds would be about 2.25" high which is why my G34 and M&P are zeroed at 25 yds,a holdover from my Bullseye days, and makes anything inside cake as it is only a height over bore issue up close ( to 7 yds or so ) https://www.shootingillustrated.com/content/best-distance-to-zero-a-pistol-mounted-red-dot/
  3. Nope, and the plus is you can now pin capture the plug to the guiderod ( I have a few bent paperclips in the rangebag) and remove it out the back when cleaning it like the old bushing open guns. My Delta Elite and Gold Cup have been that way since 1990 or so.
  4. Check with Carvercustom.com they have tungsten rods and I believe even give diameter and sell springs
  5. I cut some slots into an RCBS reloading Die box holds 6 or 7 if you really wedge them in depending on basepads from back in the days when open guns were singlestack
  6. And now S&W Performance Center has gotten involved so, if I didn’t already own a partially doctored 10/22 I’d be likely to look into one either a TC or a SWPC TC
  7. Dawson Arms has a video on tuning mags with extensions worth a watch...
  8. Strategic Edge has matches down in Chapel Hill very new shooter friendly Look up “Strategic edge uspsa” on FB Usually 6 stages 150-175 rounds per month.
  9. Did a whole test of this when I got my Fiber optic sight setup with red,green, and black insert shot with and without prescription for me everything went into a 5” group at 25 yards composite and individual overlay targets (per setup red with prescript then fresh over target for red without prescription etc. ) show no noticeable shift now between different shooters that may change also shooting style so we could safely say it is probably a combination so rezero it and run it like you stole it.
  10. I just skip the top most loop on the pouch and it leaves a large enough loop on the tabs to run my belt through on my 5.11 dump pouch when I practice. It has “speed strips” built in like the pouch they show adding this to. For match shooting extra pouches (IFAK) can stay back with the range bag /RO team.
  11. You could trim the rim on a .38 Super a bit also but SC would be an easier donor I believe
  12. It is a bit of trial and error to get it “just right” but it isn’t too critical, I guess you could measure your cardboard and add 19mm to the measurement from barrel hood to chamber mouth. I just trimmed until it worked then seated an old spare BBI head I had (my match ammo is a Falcon coated red bullet) and drilled and sharpie marked to make it as “unique” as possible to avoid confusion with a possible live round Sorry for earlier confusion Paul49
  13. I just cut a .38SuperComp brass down to 9x20.5 or so and made a dummy round (sharpie marked and drilled casebody) with a spare projectile easier than cardboard I just have a stock trigger though.
  14. Paper plates the small ones about 6” diameter get good at hitting them and you have no problem with larger targets you just visualize a 6” plate where you want to hit I have also used various bits of junk mail folded/cut to squares. Business cards for upper A when the range doesn’t like human shaped targets Years ago I used to work retail and they had 4x6” shelf ad signs in various colors check and see if your local auto parts store uses them and at end of ad save them for ya. Ritz crackers(or cheaper store knockoff brand) for new/younger shooters is always fun as well I also cleanup after the match and get the less shot up targets both USPSA and those IPSC “Turtles”
  15. JP has one I believe as Vortex is a Docter footprint ? Looking at going from JPoint to Vortex on my M&P and that is what I found when cross referencing the footprint chart.
×
×
  • Create New...